Repair materials and pigments

EC certified, self-leveling underlayment for deck battens and planks for ship and boat deck construction.
Suitable for adhesive bonding of most deck coatings (synthetic/resin-based), excluding decks made of polyethylene and polypropylene plastic.

• Teak wood for attaching deck battens/elements to the deck of a boat/ship (separate instructions available).
• Suitable for use on most material surfaces commonly used in boatbuilding.

Finds and blocks leaks. Fills hairline cracks.

Plastic Padding Marine Filler

Plastic Padding Marine Filler is an easy-to-use polyester filler specially developed for boating and marine applications. It is ideal for repairing holes and cracks above the waterline in fiberglass reinforced plastic, steel and aluminum. Once dry, the filler is easy to sand, machine, drill, tap and polish, making it a versatile solution for boat repair and maintenance.

The product can be used both indoors and outdoors.

Applications

• Boat hulls and structures above the water surface

• Fiberglass reinforced plastic

• Steel

• Aluminum

• Indoor and outdoor use

Features

• User-friendly polyester screed

• Developed for marine use

• Easy to sand and finish

• Can be drilled and tapped

• Suitable for a variety of repair jobs

Instructions

Preparation

• Clean and sand the repair surface carefully.

• Remove rust and paint

• Recommended sandpaper grit 80–120

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or about 2 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the packages immediately after dispensing.

Dissemination

• Spread with a steel trowel so that the compound penetrates the sanding patterns.

• Fill to desired thickness, maximum 3 mm

• Let it harden and roughen with sandpaper grit 80–120.

• Finish with sandpaper grit 120–320

• The best working temperature is above +20 C.

Curing time

• Approximately 20–35 minutes at temperatures above +20 C

Purifying

• Clean tools with ethyl acetate or cellulose thinner immediately after use

Things to note

• Grease, oil and silicone completely prevent the product from sticking

• Steel, aluminum and galvanized steel must be sanded and degreased before application.

Hardener for polyester, vinyl ester, gelcoat and topcoat. Add 1-2% depending on working temperature.

Plastic Padding Repair Kit

The Plastic Padding repair kit is a versatile and comprehensive solution for repairing plastic boats, surfboards, snowmobiles and ski boxes. The kit is especially suitable for ABS plastic, epoxy and polyester as well as fiberglass. It works great for repairing cracks and damage and for joining different materials.

Applications

• Plastic boats

• Surfboards

• Snowmobiles

• Ski boxes

• Fiberglass plastic

• Steel and galvanized steel

• Aluminum

Package contents

• 250 ml polyester

• 8 g hardener

• 2500 cm² of fiberglass mat

• Plastic spatula

• Brush

• Mixing cup

Features

• All in one repair kit

• Two-component polyester resin

• Suitable for repairing cracks and damage

• Excellent adhesion to various materials

• Also suitable for joining materials

Instructions

Preparation

• The repair area must be dry, clean and free of grease.

• Remove rust and paint

• Roughen the surface with sandpaper.

• When repairing a hole, sand the area approximately 2–3 cm around the hole.

Fiberglass mat preparation

• Cut a piece of fiberglass mat that covers the damage.

• The mat should extend approximately 2 cm beyond the damaged area.

Polyester blend

• Pour polyester into a mixing cup

• Add hardener in a ratio of 5–7 cm hardener to 50 ml polyester

• Mix thoroughly with a plastic spatula until smooth.

• Use protective gloves and goggles.

• Ensure good ventilation

Dissemination

• Apply a thin layer of polyester filler with a brush

• Place the fiberglass mat in place

• Saturate the carpet immediately with polyester

• If necessary, apply several layers wet or after the previous one has hardened.

• New layers must be applied within 12 hours or the surface must be re-primed.

• Plastic Padding fillers or gelcoat can be used to finish a smooth surface.

Curing time

• Approximately 25–30 minutes at +20 C

• At temperatures below +10 C, curing can be accelerated with heat.

Cleaning tools

• Clean tools with acetone or cellulose thinner before curing

Specifications

• Product name Repair kit

• Product type Two-component polyester resin

• Color Yellow

• Shelf life unopened 2 years

• Storage temperature 15–25 C

• Store in a dry and cool place.

• Protect from fire, heat sources and direct sunlight.

Gelcoat Filler putty for gelcoat

High quality putty for gelcoat surfaces and minor damage. The product is excellent for repairing gelcoat surfaces on boats and can also be used to repair minor damage to enamel and sanitary porcelain.

Gelcoat Filler is a two-component polyester filler that stands out for its good mechanical properties and high durability in varying weather conditions. It forms a durable and shiny surface that is easy to sand, polish, wax and paint in the desired color. The end result is waterproof and long-lasting.

Applications

• Boat gelcoat surfaces

• Surfboards

• Plastic baskets

• Enamel surfaces

• Sanitary ware

Features

• Two-component polyester putty

• Suitable for minor damage

• Durable and weatherproof result

• Easy to sand and finish

• Can be painted and polished

• Waterproof surface

Instructions

Preparation

• Rinse the surface clean of salt and impurities with fresh water at high pressure

• Let the surface dry.

• Sand the surface smooth with sandpaper grit 100–240.

• Remove dust by brushing and clean with a degreaser

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or about 2 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the putty and hardener immediately after dispensing to prevent drying.

Dissemination

• Spread with a steel trowel so that the compound also penetrates the sanding patterns.

• Fill to desired thickness, maximum 3 mm

• Let it harden and sand with coarse sandpaper, grit 240–800.

• Finish with finer sandpaper, grit 800–1200

• The best working temperature is around +20 C.

Curing time

• Approximately 40–60 minutes at temperatures above 20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone completely prevent the product from sticking

Plastic Padding fiberglass screed

Plastic Padding fiberglass filler is a fast-curing and highly durable repair compound for filling large holes and cracks in fiberglass and metal. The product hardens in approximately 20–30 minutes at +20 C and is suitable for demanding repair work on boats and other structures.

The fiberglass-reinforced filler creates a strong and tight finish. It is an excellent choice for repairing boat hulls and fiberglass structures, and can also be used to repair large holes and dents in car bodies. The product has excellent adhesion to metal, wood and hard plastic.

Applications

• Boat hulls

• Fiberglass structures

• Large holes and cracks in fiberglass

• Metal surfaces

• Car body damage

• Hard plastic and wood

Features

• Fiberglass reinforced repair compound

• Suitable for large damage

• Fast curing

• Very durable and tight finish

• Good adhesion to many materials

Instructions

Preparation

• Sand the surface to be repaired carefully.

• Remove rust and paint completely

Dosage

• Mix a golf ball-sized amount of the compound, approximately 40 ml.

• Add 3–4 cm of hardener, or approximately 2–4 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the packages immediately after dispensing.

Dissemination

• Spread with a steel trowel so that the compound also penetrates the sanding patterns.

• Fill to desired thickness, maximum 5 mm

• Let it harden and roughen with sandpaper grit 80–120.

• The best working temperature is around +20 C.

Curing time

• Approximately 20–30 minutes at +20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone prevent the product from sticking

• Steel, aluminum and galvanized steel must be sanded and degreased before application.

Plastic Padding fiberglass batt

Plastic Padding fiberglass batting is an effective and fast-curing repair compound for filling large holes and cracks in fiberglass and metal. The product hardens quickly, in approximately 20–30 minutes at a temperature of +20 C, and is excellent for demanding repair work.

The fiberglass reinforced base coat creates a very durable and sturdy finish. It is an ideal choice for repairing boat hulls, fiberglass bodies and other high-strength applications. The product can also be used to repair large holes and dents in car bodies. Excellent adhesion to metal, wood and hard plastic.

Applications

• Boat hulls

• Fiberglass baskets

• Large holes and cracks in fiberglass

• Metal surfaces

• Car body damage

• Hard plastic and wood

Features

• Fiberglass reinforced repair compound

• Suitable for large damage

• Fast curing

• Very durable result

• Good adhesion to many materials

Instructions

Preparation

• Sand the surface to be repaired carefully.

• Remove rust and paint completely

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or approximately 2–4 percent.

• Mix thoroughly until smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the packages immediately after dispensing.

Dissemination

• Spread with a steel trowel so that the compound penetrates the sanding patterns.

• Fill to desired thickness, maximum 5 mm

• Let it harden and roughen with sandpaper grit 80–120.

• The best working temperature is around +20 C.

Curing time

• Approximately 20–30 minutes at +20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone prevent the product from sticking

• Steel, aluminum and galvanized steel must be sanded and degreased before application.

Plastic Padding Chemical Metal

Plastic Padding chemical metal is an effective two-component repair compound designed to repair cracks and holes in metal, concrete and stone slabs. The product forms a highly dense, stable and durable surface that can be drilled, tapped and painted.

The composition containing metal particles gives the product excellent strength and exceptional adhesion. The mass is easy to shape, cut and sand, making it a versatile and reliable solution for demanding repair jobs. The product is also resistant to high temperatures up to 110 C.

Applications

• Metal surfaces

• Concrete

• Stone slabs

• Repair of cracks and holes

• Filling, sealing and joining

Features

• Two-component repair compound

• Contains metal particles

• Very durable and strong result

• Can be drilled, tapped and painted

• Easy to shape and sand

• Heat resistance up to 110 C

• Excellent adhesion

Instructions

Preparation

• Sand the surface to be repaired carefully to remove rust and paint.

• Recommended sandpaper grit 80–120

Dosage

• Mix a golf ball-sized amount of putty, about 40 ml.

• Add 3–4 cm of hardener, or approximately 2–4 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the filler and hardener packages immediately after dispensing.

Dissemination

• Apply with a steel trowel in a scraping motion to allow the compound to penetrate the sanding marks.

• Fill to desired thickness

• After hardening, sand with coarse sandpaper, grit 80–120.

• The best working temperature is above +20 C.

Curing time

• Approximately 20–36 minutes at +20 C

Purifying

• Clean tools with acetone or cellulose solvent immediately after use

Things to note

• Grease, oil and silicone prevent the product from sticking

• Clean sanded aluminum and galvanized steel must be cleaned before application.

Loctite 577 Thread Sealant is a universal sealant for coarse metal threads. It is available in a bottle and has excellent durability. Suitable for all metals at low and high temperatures. Maximum pipe size: 3'. Pull-out strength: Average. Operating temperature range: -50°C to +150°C. Pull-out torque: 11 Nm.

Woven fiberglass tape is suitable for use with polyester or epoxy.

Fiberglass mat 300g 1m

Fiberglass mat 300g 5m.