Plastic Padding Marine Filler 2-component, 180ml

Plastic Padding Marine Filler

Plastic Padding Marine Filler is an easy-to-use polyester filler specially developed for boating and marine applications. It is ideal for repairing holes and cracks above the waterline in fiberglass reinforced plastic, steel and aluminum. Once dry, the filler is easy to sand, machine, drill, tap and polish, making it a versatile solution for boat repair and maintenance.

The product can be used both indoors and outdoors.

Applications

• Boat hulls and structures above the water surface

• Fiberglass reinforced plastic

• Steel

• Aluminum

• Indoor and outdoor use

Features

• User-friendly polyester screed

• Developed for marine use

• Easy to sand and finish

• Can be drilled and tapped

• Suitable for a variety of repair jobs

Instructions

Preparation

• Clean and sand the repair surface carefully.

• Remove rust and paint

• Recommended sandpaper grit 80–120

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or about 2 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the packages immediately after dispensing.

Dissemination

• Spread with a steel trowel so that the compound penetrates the sanding patterns.

• Fill to desired thickness, maximum 3 mm

• Let it harden and roughen with sandpaper grit 80–120.

• Finish with sandpaper grit 120–320

• The best working temperature is above +20 C.

Curing time

• Approximately 20–35 minutes at temperatures above +20 C

Purifying

• Clean tools with ethyl acetate or cellulose thinner immediately after use

Things to note

• Grease, oil and silicone completely prevent the product from sticking

• Steel, aluminum and galvanized steel must be sanded and degreased before application.