Intelligent alarm system for safer operation of bilge pumps and other installations. The system combines visual and acoustic warning with control via panel switches. It can be used in conjunction with electronic level switches and other sensors. When the water level exceeds 41 mm, the alarm is activated, the red indicator light comes on and it gives an alarm signal of approximately 85 dB. When the level drops below 9.5 mm, the alarm is automatically switched off. A built-in 3-second delay prevents false alarms in the event of temporary water movements. The system is completely enclosed and has no moving parts, so it is not affected by oil or dirt in the bilge.
* Complete alarm and control panel for bilge pumps
* For 12 V systems, maximum load of 20 A
* Gives both a light and sound signal (?85 dB) when the water level is too high
* Activates at 41 mm, deactivates at 9.5 mm
* 3 second delay prevents false alarms
* Closed system with no moving parts – protected from corrosion and dirt
* Unique three-position switch can mute the sound but keep the indicator light on
* Environmentally friendly design without mercury
Specifications:
Voltage: 12 V DC
Maximum load: 20 A
Alarm volume: ?85 dB
Activation level: 41 mm
Closing level: 9.5 mm
Delay: 3 seconds
Cables: Switch 16 AWG / 1000 mm, Alarm 16 AWG / 100 mm
Electronics: Semiconductor, encapsulated
Environmental: Mercury-free, no moving parts
Weight: 0.2 kg
Intelligent alarm system for safer operation of bilge pumps and other installations. The system combines visual and acoustic warning with control via panel switches. It can be used in conjunction with electronic level switches and other sensors. When the water level exceeds 41 mm, the alarm is activated, the red indicator light comes on and it gives an alarm signal of approximately 85 dB. When the level drops below 9.5 mm, the alarm is automatically switched off. A built-in 3-second delay prevents false alarms in the event of temporary water movements. The system is completely enclosed and has no moving parts, so it is not affected by oil or dirt in the bilge.
* Complete alarm and control panel for bilge pumps
* For 12 V systems, maximum load of 20 A
* Gives both a light and sound signal (?85 dB) when the water level is too high
* Activates at 41 mm, deactivates at 9.5 mm
* 3 second delay prevents false alarms
* Closed system with no moving parts – protected from corrosion and dirt
* Unique three-position switch can mute the sound but keep the indicator light on
* Environmentally friendly design without mercury
Specifications:
Voltage: 12 V DC
Maximum load: 20 A
Alarm volume: ?85 dB
Activation level: 41 mm
Closing level: 9.5 mm
Delay: 3 seconds
Cables: Switch 16 AWG / 1000 mm, Alarm 16 AWG / 100 mm
Electronics: Semiconductor, encapsulated
Environmental: Mercury-free, no moving parts
Weight: 0.2 kg