Orbitrade

Fuel pump Volvo Penta 2001–2003 & MD1–MD17

High-quality fuel pump (feed pump) from Orbitrade for several Volvo Penta diesel engines.
The fuel pump transfers diesel from the fuel tank to the injection pump and is an essential part of the reliable operation of the engine.

In most models, the fuel pump is mounted on the side of the engine and is driven by the engine camshaft.

Important information

• The condition of the fuel pump is very important for the operation of the engine

• A faulty pump can cause:

  • starting difficulties

  • lack of power

  • uneven running

• If there is any doubt about the condition of the pump, replacement is recommended.

• The fuel pump is often called the feed pump

• Not to be confused with the injection pump , which distributes fuel to the cylinders

Fit

This fuel pump is intended for the following Volvo Penta engines:

2000 series

• 2001*, 2001AG*, 2001B*, 2001BG*

• 2002*, 2002AG*, 2002B*, 2002BG*

• 2003*, 2003AG*, 2003B*, 2003BG*

• 2003T*, 2003TB*

MD series

• MD1B

• MD2, MD2A, MD2B

• MD3B

• MD5A, MD5B, MD5C

• MD6A, MD6B

• MD7A, MD7B

• MD11C, MD11D

• MD17C, MD17D

Other

• AQD2B

* Note: Previous version with lid – please check OEM number or compare product to picture before ordering.

OEM references

• Corresponds to OEM number: 21134777

• Manufacturer: Orbitrade

Summary

• Reliable and durable feed pump

• Fits a wide range of Volvo Penta diesel engines

• An excellent choice for maintenance or troubleshooting

• Water separator – effectively removes water from fuel

• Approved for diesel use

• Filtration: 8 microns

• Maximum flow: 50 l/h

• Drain tap at the bottom for easy maintenance

• NOTE: Connection nipples are not included in delivery.

  • 8 mm nipples: item no. 20297

  • 10 mm nipples: item no. 20299

Rubber diaphragm (bellows) Volvo Penta S-drive

Orbitrade rubber grommet / bellows for Volvo Penta S-drive drives. The grommet acts as a seal between the hull and the drive and is a critical part of the boat's watertightness.

Compatibility

Fits the following Volvo Penta sailboat drives:

120 series

• 120S-A

• 120SB

• 120S-C

• 120S-D

• 120S-E

130 series

• 130S-A

• 130S-B

• 130SR-A

• 130SR-B

150 series

• 150S-A

• 150S-B

• 150SR-A

• 150SR-B

Installation instructions (important)

When installing the bellows/rubber membrane in the S-drive, proceed as follows:

• Lightly sand both adhesive surfaces with sandpaper.

• Clean the surfaces with acetone

• Apply solvent-based contact adhesive (e.g. Illbruck CT050) to both surfaces

• Let the glue dry until the surfaces are almost dry to the touch.

• Press the bellows/rubber plate against the frame

• Press the edges carefully to ensure the best adhesion.

Product information

• Product type: Rubber diaphragm / S-drive bellows

• Manufacturer: Orbitrade

• OEM number (corresponds to): 22303438

• Previous OEM number: 854932

Attention

• The bellows is a safety-critical part and its condition should be checked regularly.

• The replacement interval is determined by Volvo Penta's maintenance instructions.

• A leaking or outdated bellows can pose a serious risk of leakage

Impeller grease

Grease the impeller when replacing it. Grease prevents the impeller from running dry and becoming damaged after the seawater pump has been drained of water. Use grease both when replacing the impeller and when the impeller has simply been removed and reinstalled.

Corresponds to OEM number: 3862178

Impellers Volvo Penta / BUKH / BMW / Perkins

Loaded impellers for Volvo Penta, BUKH, BMW and Perkins engines. Toimitukseen sisältyy kanditiviste (cover gasket) .

OEM News

• Volvo Penta OEM: 24139377

Half

• Thickness: 65 mm

• Corpus: 50 mm

Sopivus

Volvo Penta – diesel and petrol engines (cont.)

• AD / AQAD / AQD -services:
  AD30A, AD31 (A/B/D/DA/LA/PA/XD), AD40B, AD41 (A/B/BJ/D/LA/PA)
  AQAD30A, AQAD40A, AQAD40B, AQD40A
  AQD70B, AQD70BL, AQD70C, AQD70CL, AQD70D

• D4 circuit (load cattavus):
  D4-145I-G … D4-320I-G (not all A/D/I variants)

• D41 / D5 / D7 weights:
  D41B, D41D, D41L-A
  D5A-B TA, D5A-T, D5A-TA
  D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA

• KAD / KAMD -column:
  KAD300-A, KAD32P, KAD42A/B/PA, KAD43P-A/B, KAD44P (A/B/C)
  KAMD300-A, KAMD42A/B/PA, KAMD43P (A/B), KAMD44P (A/B/C)

• MD degree:
  MD100A/B/B-CC, MD120A, MD30A, MD31A, MD40A, MD70B/BK/C

• TAMD / TMD / THAMD swords:
  TAMD120A/B/121D, TAMD30/31 (A/B/D/LA/M/MA/PA/S),
  TAMD40A/B, TAMD41 (A/B/D/HA/HB/P/PA), TAMD42B/WJ-A,
  TAMD60A/B/C, TAMD70B/C/D/E
  THAMD70B/C
  TMD100A, TMD120A/B/121C, TMD30/31 (A/B/D/LA),
  TMD40A/B/C, TMD41A/B/D/LA, TMD70B/C

• Substitutions:
  MS25A, MS25A-A, MS25L

Perkins

• T6.354 – 175 hv

Huomio

Only the OEM number and measurements are available, they are the same engine that uses the water pump.

Fuel pump Volvo Penta D30–D44 & D300

High-quality fuel pump (feed pump) from Orbitrade for Volvo Penta diesel engines.
The fuel pump transfers diesel from the fuel tank to the injection pump and is a key part of the engine's reliable operation.

In many engine models, the fuel pump is mounted on the side of the engine and is driven by the engine camshaft.

Important information

• The condition of the fuel pump is very critical to the operation of the engine

• A faulty pump can cause:

  • starting problems

  • lack of power

  • uneven running

• If there is any uncertainty about the condition of the pump, replacement is recommended.

• Not to be confused with the injection pump , which distributes fuel to the cylinders

Fit

Fits the following Volvo Penta engine series:

• D30 series

• D31 series

• D32 series

• D40 series

• D41 series

• D42 series

• D43 series

• D44 series

• D300 series

Compatible engine models

• D30

  • MD30A, TMD30A, TAMD30A, AQAD30A

• D31

  • AD31L-A, AD31P-A

  • TMD31L-A, TAMD31L-A, TAMD31M-A, TAMD31P-A, TAMD31S-A

  • MD31A, TMD31A, TAMD31A, AQAD31A, AD31A

  • TMD31B, TAMD31B, AD31B

• D32

  • KAD32P-A

• D40

  • AQD40A, TMD40A, MD40A, TAMD40A, AQAD40A

  • TMD40B, TAMD40B, TMD40C, AQAD40B

• D41

  • D41A, D41B, AD41A, AD41B

  • TMD41A, TMD41B, TAMD41A, TAMD41B

  • D41L-A, TMD41L-A

  • TAMD41H-A, TAMD41H-B, TAMD41P-A, TAMD41L-A, TAMD41M-A

• D42

  • KAD42B, KAMD42B, TAMD42B

  • KAD42P-A, KAMD42P-A

  • TAMD42WJ-A

• D43

  • KAD43P-A, KAMD43P-A

• D44

  • KAD44P-A, KAD44P-B, KAD44P-C

  • KAMD44P-A, KAMD44P-C

• D300

  • KAD300-A, KAMD300-A

OEM references

• Corresponds to OEM number: 3582310

• Previous OEM number: 860320

• Manufacturer: Orbitrade

Summary

• High-quality and reliable feed pump

• Designed for a wide range of Volvo Penta engines

• An excellent choice for maintenance or troubleshooting

Impeller Volvo Penta / BUKH / BMW / Perkins

High quality impeller for Volvo Penta, BUKH, BMW and Perkins engines. Delivery includes cover gasket .

OEM information

• Volvo Penta OEM: 21951350

Dimensions

• Diameter: 57.1 mm

• Height: 31.5mm

Fit

Diesel engines

• AQD21A, AQD21B

• MD21A, MD21B

Gasoline engines

• 230 series: 230A, 230B

• 250 series: 250A, 250B, 251A

• AQ series:
  AQ115A, AQ115B
  AQ120B
  AQ125A, AQ125B
  AQ130A, AQ130B, AQ130C, AQ130D
  AQ131A, AQ131B, AQ131C, AQ131D
  AQ140A
  AQ145A, AQ145B
  AQ151A, AQ151B, AQ151C
  AQ165A
  AQ170A, AQ170B, AQ170C
  AQ171A, AQ171C

• B-series:
  B20
  B230, B230E, B230F, B230FB, B230FX

Attention

We always recommend that you verify the OEM number and impeller dimensions before ordering, as the same engine series may include several different water pumps.

Yanmar impeller with seal

Impeller for Yanmar engines, supplied with a seal. The impeller is a key part of the water pump and is responsible for circulating the engine's cooling water. Regular replacement helps prevent overheating and ensures reliable and long-lasting engine operation.

Product information

• Impeller for Yanmar engines

• Includes gasket

• Application water pump

• Original equivalent spare part

• Reference number 7177

Compatibility

Fits the following Yanmar engines

• 3JHT

• 3JHTBE

• 4JH

• 4JHDTE

• 4JHHTE

• 4JHTE

• 4JHTUE

• 4JH2DTE

• 4JH2E

• 4JH2TE

• 4JMTE

It is recommended that the impeller be replaced according to the manufacturer's maintenance program to ensure the reliability and service life of the motor.

Yanmar impeller with seal

Impeller for Yanmar engines, supplied with a seal. The impeller is a key part of the water pump and ensures the circulation of cooling water in the engine. Regular replacement helps prevent overheating and ensures reliable engine operation.

Product information

• Impeller for Yanmar engines

• Includes gasket

• Application water pump

• Original equivalent spare part

• Reference number 7184

Compatibility

Fits the following Yanmar engines

• 2QM20

• 3QM20

• 3HM

It is recommended that the impeller be replaced according to the manufacturer's maintenance program to ensure long engine life and operational reliability.

Service kit Volvo Penta 2001–2003

A maintenance kit that fits all Volvo Penta 2001, 2002 and 2003 series engines . A handy package for scheduled maintenance.

Contain

• Oil filter

• Fuel filter

• Impeller with seal and grease

Corresponds to OEM number 877194 .

Drive belt Volvo Penta 2030 / D22

High quality Orbitrade Marine drive belt for generator. The drive belt should be replaced regularly according to the maintenance schedule. If the belt shows cracks, tears or other wear, it should be replaced immediately to avoid engine damage.

Corresponds to OEM number: 978482
Previous OEM number: 966901

Fits the following Volvo Penta engines

• 2030 series

• D22 series

More precise compatibility

• MD2030A

• MD2030B

• MD2030C

• MD2030D

• MD22P-B

• TAMD22P-B

• TMD22-B

A reliable drive belt ensures trouble-free operation of the generator and auxiliary equipment.

Yanmar impeller with seal

Impeller for Yanmar outboard and inboard engines, supplied with a seal. The impeller is a key part of the water pump and is responsible for circulating the engine's cooling water. Regular replacement helps prevent overheating and ensures reliable engine operation.

Product information

• Impeller for Yanmar engines

• Includes gasket

• Application water pump

• Original equivalent spare part

Compatibility

Fits the following Yanmar engines

• SB18

• YSE8 12

• YSB8 12

• YSM8 12

• 2QM15

• 2GM

• 3GM

It is recommended that the impeller be replaced according to the manufacturer's maintenance program to ensure the engine's service life and reliability.

Thermostat Volvo Penta MD1–MD17

The thermostat is an important part of the engine's cooling system. Its job is to regulate the engine's operating temperature . A faulty thermostat can cause the engine to run either too cold or overheat. In the worst case, the engine can start to boil, but running too cold is also not good, as it increases wear and fuel consumption.

Thermostat check

The thermostat can be tested by placing it in hot water and checking whether it opens at the correct temperature . If there is any uncertainty about its operation, it is advisable to replace the thermostat with a new one.

Product information

• Fits Volvo Penta MD1–MD17 series engines

• Only for engines with Martec or Sen-dur fresh water cooling

• OEM number: 875780

• O-rings included

• Opening temperature: 75 °C

Suitable engine kits

• MD1

• MD2

• MD3

• MD6

• MD7

• MD11

• MD17

Yanmar impeller

Impeller for water pump maintenance for Yanmar engines. The impeller ensures the circulation of the engine's cooling water and is a key part of the engine's reliable and efficient operation. Regular replacement helps prevent overheating and extends the engine's service life.

Product information

• Impeller for Yanmar engines

• Application water pump

• Original equivalent spare part

• Reference number 4915

Compatibility

Fits the following Yanmar engines

• 2YM15

• 3YM20

• 3YM30

It is recommended that the impeller be replaced according to the manufacturer's maintenance schedule to ensure engine reliability.

Impeller Volvo Penta / BUKH / BMW / Perkins

High quality impeller for many Volvo Penta, BUKH, BMW and Perkins engines. Corresponds to the original part and comes with a head gasket .

OEM information

• Volvo Penta OEM: 21951346

Suitability (condensed)

Volvo Penta – diesel engines

• 2000 series: 2003T, 2003TB, 2003TR

• AQ / AD / D / MD / TAMD / TMD series:
  AQD21A
  D2-50F, D2-55 (all versions), D2-60F, D2-75 (all versions)
  MD21A, MD22 (A/L/P)
  TAMD22P-B
  TMD22A, TMD22B, TMD22P-C
  231LB

Volvo Penta – gasoline engines

• 3.0 series

• 4.3 series (GI, GL, GS, GXi, OSi – several versions)

• 5.0 series (GI, GL, GXi, OSi – several versions)

• 5.7 series (GI, GL, GS, GXi, OSi, OSXi – multiple versions)

• 5.8 series

• 7.4 series

• 8.2 series

Volvo Penta – other series

• 430–434 series

• 500–572 series

• 740B

• AQ Series: AQ115–AQ290 (multiple models)

• B and BB series: B20, BB115–BB260

• DPX series: DPX385, DPX415

• MB series: MB20A, MB20B, MB20C

Other manufacturers

Perkins

• M50, M60, M80

• 4.107, 4.108, 4.236

• 6.354

• T6.354

• SEK 115–145

BUKH

• DV36ME / DV36SME

• DV48ME / DV48SME

• 2G105

• 3G105

Attention

The impeller is suitable for a wide range of engines. We always recommend checking the OEM number and dimensions before ordering, especially for petrol engines where there may be multiple coolant pump options.

The fuel pump supplies diesel to the engine. It is often mounted on the side of the engine and pumps diesel from the tank to the injection pump. In many models, the fuel pump is driven by the engine camshaft.

It is extremely important that the fuel pump is in good condition and working as intended. If you are unsure about the condition of the pump, replace it!

The fuel pump is often called the feed pump and should not be confused with the injection pump, which distributes fuel to the various cylinders.

This fuel pump corresponds to the original number 859428 and is designed specifically for the following engine versions:
2001, 2001B, 2001AG, 2001BG, 2001D, 2001R
2002, 2002B, 2002D, 2002AG, 2002BG
2003, 2003 SOLAS, 2003B, 2003B-SOLAS, 2003D, 2003R, 2003R SOLAS
2003T, 2003TB, 2003TB SOLAS, 2003TR

NOTE! The fuel pump is a relatively new model (check the original number or compare to the picture)

Thermostat Volvo Penta D31–D300

The thermostat is a key part of the engine's cooling system. Its job is to regulate the engine's operating temperature . A faulty thermostat can cause the engine to overheat or, alternatively, to run too cold. Both situations are harmful: overheating can cause serious damage, and running too cold increases wear and fuel consumption.

Thermostat check

You can test the thermostat by heating it in water and checking whether it opens at the correct temperature . If there is any uncertainty about its operation, it is best to replace the thermostat with a new one.

Product information

• Fits Volvo Penta D31–D300, D100 and D121 series

• OEM number: 3831424

• Replaces previous OEM numbers: 467015, 876128, 875849, 273952

• O-ring included

• Opening temperature: 82 °C

• Many engines use two thermostats side by side

Suitable engine kits

• D31

• D32

• D41

• D42

• D43

• D44

• D300

• D100

• D121

Suitable engine models

D31 series

• TMD31L

• TAMD31P / L / M / S

• AD31P, AD31L

• MD31A

• TMD31B, TMD31D

• TAMD31B, TAMD31D

• AD31B, AD31D, AD31XD

D32 series

• KAD32P

D41 series

• TMD41, TMD41L, TMD41B, TMD41D

• D41A, D41B, D41D

• TAMD41, TAMD41P, TAMD41L, TAMD41M, TAMD41H

• TAMD41B, TAMD41D

• AD41A, AD41B, AD41D

• AQAD41A

D42 series

• TAMD42WJ-A

• KAD42, KAD42A, KAD42B, KAD42P-A

• KAMD42, KAMD42A, KAMD42B, KAMD42P-A

• TAMD42B

D43 series

• KAD43P

• KAMD43P

D44 series

• KAD44P

• KAMD44P

D300 series

• KAD300

• KAMD300

D100 and D121 series

• TD100CHC, TD100CRC

• TMD100C

• TMD102A

• TAMD102A, TAMD102D

• TAMD103A-A, TAMD103A-A AUX

• TD121CHC, TD121CRC

• TAD121CHC

• TMD121C

• TAMD121C, TAMD121D

• TAMD122A, TAMD122C, TAMD122D, TAMD122P

• TMD122A

Fuel filter Yanmar Orbitrade Marine 7176

Fuel filter for Yanmar diesel engines manufactured by Orbitrade Marine. The filter ensures clean fuel supply to the engine, protects the fuel system from contaminants and helps maintain reliable engine operation. The high-quality construction is ideal for marine use.

Product information

• Fuel filter for diesel engines

• Manufacturer Orbitrade Marine

• Product number 7176

• Original equivalent spare part

• Suitable for Yanmar engines

Compatibility

Fits the following Yanmar engines

• 1GM

• 1GM10

• 2GM

• 2GM20

• 2GM20F

• 2QM15

• 2QM20

• 3GM

• 3GM30

• 3GMF

• 3GM30F

• 3QM30F

• 3HM

• 3HMF

• 3HM35

• 3HM35F

• SB8

• SB12

• YSB8

• YSB12

• YSM8

• YSM12

It is recommended to replace the fuel filter regularly to ensure the cleanliness of the fuel system and long engine life.

Orbitrade flapless bellows suitable for Volvo Penta engines in the 200-290 series and the SP, DP and DPX models listed below. The bellows are supplied with ABA hose clamps and are of high quality and are equivalent to the original.

The bellows must be replaced according to the operating device instructions.

Corresponds to OEM numbers 876631 and 875848.

Fits the following Volvo Penta drives:
200, 250
270, 270T, 275
280, 280T, 280DP, 285A
290, 290A, DP290A, 290DP
SP-A, SP-A/MT, SP-A1, SP-A2
SP-C, SP-C1
SP-E
DP-A, DP-A1, DP-A2
DP-B, DP-B1
DP-C, DP-C1
DP-D, DP-D1
DP-E
DPX-C, DPX-R, DPX-S1