Caravan Battery Chargers

An adaptive 5-stage charger designed specifically for boaters, available in both 30 A and 50 A models (12 V). Both models can charge three different batteries. The Smart 1+1 model also offers a 3 A charging output for the starter battery and a second output for the consumer battery. 24V models available with 16 A / 25 A charging currents. Equipped with Bluetooth connectivity, so you can monitor the charger's functions and set alarm limits directly from your smartphone. Adaptive, intelligent, dynamic charging features

Smart charging options for every need:
Smart (3): Three power outputs that allow you to charge three battery banks simultaneously. Each output delivers maximum current without exceeding the charger's capacity.
Customizable charging to meet your battery needs:
6-stage customizable charging algorithm: From bulk charging to storage, each stage is automatically optimized to extend battery life.
Variable absorption time: Adapts to the usage situation to avoid overcharging and maximize battery life.
Protect your batteries with smart safety features:
BatterySafe Mode: Prevents damage from gas generation by automatically adjusting the voltage rise.
Storage Mode: Minimizes gas evolution and corrosion when the battery is not used for 24 hours, extending battery life.
Remote control and monitoring via Bluetooth:
Bluetooth Control: Complete control of voltage and current via Bluetooth directly from your phone.
Programmable via Bluetooth: Adjust the charging algorithm easily and conveniently.
Advanced connectivity options increase functionality:
VE.Direct interface: Connect to GX devices and enable direct reading and relay programming.
Synchronized charging: Pair multiple Smart IP43 chargers to improve charging efficiency.
With up to 50A charging capacity, the Smart IP43 charger offers a versatile and intelligent solution for all your battery needs. Discover the future of battery management today and give your batteries the protection and performance they deserve.

This indicator kit is designed for easy installation in vehicles and uses a clear "traffic light" system to show the battery charge level. Connect the charger to the indicator
connection, install the display in a suitable location and route the cable to the battery.

The CT5 POWERSPORT is an automatic charger designed for charging and maintaining 12V batteries for jet skis, motorcycles, mopeds and other similar vehicles. This charger ensures that the battery is always full and the vehicle is ready for use, even when stored for long periods.

The CT5 POWERSPORT charger has three fully automatic charging programs:

Normal: for all lead-acid batteries, including AGM batteries.
Lithium: for all lithium batteries.
Recond: for deeply discharged wet lead-acid batteries.
The charger can be used directly connected to the battery without fear of overloading or undercharging. It is easy to use and compatible with all 12V
with batteries.

Convenient and easy to use
Test and restore battery capacity
Power: Max. 2.3 A
No sparks
Reverse polarity protected
Short-term protection
The CT5 POWERSPORT charger is an excellent choice if you want to keep your battery in good condition and ensure that your vehicle is always ready to drive.

Carry and store your battery charger safely. The CS STORAGE CASE is durable, strong and lightweight, so you can store your battery charger in the best possible way and protect it from the elements wherever you go. Designed and tested in Sweden, the CS STORAGE CASE is made of strong 600D water-repellent nylon with a protective padded interior and a convenient carrying handle. The metal zipper allows quick access to your battery charger, so it is ready to use when needed. Durable. Water-repellent. Lightweight.

Designed from the ground up, the Orion XS redefines adaptive DC-DC charging. It is used in dual battery systems charged by an intelligent alternator. This device not only ensures the best possible performance, but also the safety of your system.
Stay in control with configurable input and output currents and be sure that the Orion XS operates at full power even at 40°C. Innovative aluminum PCB cooling technology delivers an astonishing 98% efficiency without fans.
As part of your Victron system, Orion XS offers full monitoring and control capabilities, giving you complete control over your device and system.
Fully customizable.
Engine disconnect sensor.
Intelligent charging algorithms.
Works with VictronConnect.
Customizable download.
Precisely adjust input and output currents with easy-to-use controls. This helps protect generators from overload and properly charge the service battery, especially with smart generators.
Parallel to increase output current.
You can connect an unlimited number of Orion XS devices in parallel. It is easy to scale the output power to meet the requirements of your system.
Smart generator compatibility
With a built-in detection system that detects when the engine is to be disconnected, Orion XS ensures that the charger only draws power when the engine is running. It also helps to obtain the appropriate charging current from smart generators, such as those available on Euro 5 and Euro 6 engines.
Customizable charging algorithm.
The Orion XS features customizable charging algorithms and eight preset battery modes. For lead-acid batteries, these settings ensure optimal absorption times for both surface loads and deep discharges.
Complete electronic protection
The Orion XS is equipped with comprehensive electronic protection against overload, short circuit and excessive temperatures. It automatically reduces the output current when the highest product temperature is reached.
Low temperature disconnection and undervoltage protection
To avoid damage to lithium batteries, the charger automatically shuts down at low temperatures and when the input voltage drops to a user-defined threshold to protect the starter battery from deep discharge.
Dust and waterproof
Orion XS is designed to withstand dust and water contamination and has an IP65 rating.
Weight: 0.330 kg
Dimensions: 137.3 x 123.1 x 40 mm

Smart charger functions! The Phoenix Smart Charger IP43 is a six-stage charger that takes care of your batteries safely and gives them optimal charging.

With built-in Bluetooth, this wireless charger offers ease of use for charging batteries. Here are some features that make it an essential tool for boaters and other enthusiasts:

• Smart charging options for every need:
• Smart (1+1): Dual outputs for two battery banks. The second output is for the starter battery and provides up to 4A.
• Customized charging for batteries as needed:
• 6-stage customizable charging algorithm: From bulk charging to storage, each stage is automatically optimized to extend battery life.
• Variable Absorption Time: Adapts to the usage situation to prevent overcharging and maximize battery life.
• Protect your batteries with smart safety features: BatterySafe Mode: Prevents damage due to gassing by automatically adjusting the voltage rise. Storage Mode: Minimizes gassing and corrosion when the battery is not used for 24 hours, extending battery life.
• Remote control and monitoring via Bluetooth.
• Bluetooth Control: Complete control over voltage and current via Bluetooth directly from your phone.

With up to 50A charging capacity, our Smart IP43 charger offers a versatile and intelligent solution for all your charging needs.

Power cord must be purchased separately.

The Mastervolt Chargemaster Plus 50A 12V is a battery charger for fixed installation, designed to provide excellent charging for your batteries even in demanding environments. The Chargemaster 50A has three outputs for batteries. The consumer batteries are connected to output 1 and additional groups to outputs 2 and 3 (e.g. engine and bow batteries).

Programmable charger for all types of batteries, fully automatic. With the advanced charging algorithm, 3-stage+, your batteries always receive the right charge regardless of the level. Automatic 3-stage+ charging for GEL/AGM/Flooded (regular batteries)/Lithium Ion batteries. The chargers are explosion-proof according to CE, ABYC, A-31 and SAE J1171/ISO 8846 standards. They can be mounted vertically or on a wall with four screws or alternatively a mounting frame can be used.

The Blue Smart IP65 13A 24V charger is a new professional battery charger with built-in Bluetooth. The charger can be used in the workshop and in motor vehicles such as boats, caravans and trucks with a 24V system.

The charger fully charges the battery. The seven-stage charging algorithm gets the most out of your battery. The charger delivers the necessary power to the battery, maintaining its condition and ensuring better performance and longer life.

Reviving completely discharged, "dead" batteries. Unlike other brands, the Blue Smart IP65 charger attempts to charge completely discharged batteries at first with a low current. After that, normal charging resumes as soon as the voltage at the battery terminals is high enough.

Connecting the battery is easy. The charger comes with both alligator clips and M8 eyelets, making it easy to connect the battery. You can keep the battery connected at all times if you want.

Keep your battery status under control remotely. The Blue Smart IP65 charger has built-in Bluetooth, allowing you to monitor the status of the charger and battery via your smartphone, tablet or laptop. All charger settings can be made using the VictronConnect app.

Water, dust and chemical resistant. Intelligent seven-stage charging algorithm. Resuscitation of completely discharged, "dead" batteries. Automatic power supply function. Performance in severe cold conditions: down to -30 °C. Several features to improve service life. Low-power setting for charging smaller batteries. Lithium battery mode. Bluetooth Smart allows you to make settings and configure, read voltage and current.

The waterproof Blue Smart IP67 battery charger also charges lithium-ion (LiFePO?) batteries with built-in Bluetooth so you can monitor the status of the charger and battery via your smartphone, tablet or laptop using the VictronConnect app.

The charger features a customizable 5-stage charging algorithm (bulk, absorption, recovery, float, storage). The Blue Smart charger features microprocessor-controlled customizable battery management. The customization feature automatically optimizes the process based on battery usage.

It is fully encapsulated, so water, oil or dirt will not damage the charger. The housing is made of cast aluminum and the electronics are embedded in resin.

It has two LEDs that indicate the charging status. Yellow LED: bulk charging (fast flashing), absorption (slow flashing), float (steady on), storage (off). Green LED: power on.

The IP67 charger consumes 95% or more of the efficiency, generating three to four times less heat. When the battery is fully charged, the power consumption is less than one watt, which is five to ten times better than the industry standard.

Unlike many other chargers, Victron's Blue Smart IP67 charger also attempts to charge completely discharged batteries with a low current initially. Normal charging then resumes as soon as the battery terminals have reached sufficient voltage.

Specifications:
Charging current, normal mode: 13A
Charging current, LOW: 4A
Efficiency: 95%
Battery connection: Black and red cable, 1.5m
Protection class: IP67
Weight: 1.8kg
HxWxD: 85x211x60mm
Charging voltage "absorption": Normal: 14.4V, High: 14.7V, Li-ion: 14.2V
Charging voltage "float": Normal: 13.8V, High: 13.8V, Li-ion: 13.5V
Charging voltage "storage": Normal: 13.2V, High: 13.2V, Li-ion: 13.5V

The Blue Smart charger uses a special charging algorithm for charging Li-ion (LiFePO?) batteries, utilizing automatic Li-ion voltage protection reset.

The M8 connection cable with fuse is an accessory for the Blue Smart IP65 charger with DC connection.

Charging indicator with M8 loop connection. Accessory for Blue Smart IP65 chargers. Includes 30 amp fuse.

Orion-Tr Smart 12/24V-15A is an isolated DC/DC charger with adaptive 3-phase charging and built-in Bluetooth. With remote control: With the remote control, there is no need for a high-voltage switch in the supply cables. The remote control can be controlled with a low-voltage switch or, for example, with the engine on/off switch. Adjustable output voltage: 20-30V Short-circuit protection. IP43 protection when the device is mounted with screws facing down No special tools required for installation Input fuse Technical data: Built-in Bluetooth Input voltage range: 10-17V Output voltage adjustment range: 20-30V Continuous output current at 25°C: 430W Continuous output current at 40°C: 360W Dimensions (wxhxd): 130x186x80mm Weight: 1.8kg

CS FREE is the world's first fully portable battery charger with trickle charging and Adaptive Booster. It quickly and safely jump-starts your discharged battery without the need to connect it to the mains. In other words, it is a 12V power bank for your vehicle that works with both lead and lithium batteries (12V LiFePO4). It also keeps your portable tech devices like phones, laptops and cameras fully charged. Charge it, take it with you and use it anywhere!

• No need to be plugged into an outlet.
• The internal battery charges in 1 hour.
• Stays fully charged for up to a year.
• Adaptive Boost safely charges your dead battery in 15 minutes without damaging your vehicle's electronics.
• Charges and maintains lead and lithium batteries and keeps them in top condition.
• Easy to use - Clear and easy-to-read display
• Charge portable devices - smartphones, tablets, laptops, etc.
• Charges or operates on battery power and solar energy.
• Works with all 12V lead-acid batteries, AGM, EFB, Gel and LiFePo (lithium) batteries 10-130Ah.
  

The D250SE is a fully automatic, 5-stage charger that delivers up to 20A to all 12V lead or lithium batteries* from 40-300Ah. It has selectable charging programs for AGM and lithium* batteries. The dual input allows you to charge from a generator, solar panel/wind power. When the service battery is fully charged, the D250SE automatically directs the charging current to the starter battery. The D250SE can maintain a stable output of up to 20A on vehicles with intelligent ECU-controlled alternators and also has a temperature sensor to enable optimized charging regardless of weather conditions.

FEATURES:
• 20 fully automatic temperature-compensated charges for 40-300 Ah batteries while on the move
• Dual input (solar panel and generator in parallel)
• Smart generator compatible
• Lithium* and lead-acid modes available
• Solar panel controller with maximum power
• Maximum Power Point Tracking (MPPT)

The Blue Smart IP65 7A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.

The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.

The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.

The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.

Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.

The Blue Smart IP65 10A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.

The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.

The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.

The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.

Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.

The Blue Smart IP65 15A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.

The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.

The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.

The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.

Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.

The Blue Smart IP65 25A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.

The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.

The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.

The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.

Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.

The fully waterproof Blue Smart IP67 is a new 17A professional charger that also charges lithium batteries (LiFePo). With built-in Bluetooth connectivity, you can monitor the charger's status from your smartphone, tablet or computer using the VictronConnect app.

Adaptive 5-stage charging algorithm (bulk - absorption - conditioning - float - storage). The Blue Smart charger has a microprocessor-controlled battery management. The feature automatically adapts the charging process according to how the battery is used.

Fully encapsulated and shockproof, so water, oil or dirt will not damage the charger. The housing is cast aluminum and the electronics are molded in resin.

Two LEDs to indicate charging status. Yellow LED: bulk charging (flashing fast), absorption (flashing slow), float (continuously on) and storage (off). Green LED: power on

High efficiency: With over 95% efficiency, Blue Smart chargers generate three to four times less heat. When the battery is fully charged, power consumption drops to less than one watt, which is five to ten times better than the industry standard.

Unlike many other brands of chargers, the Blue Smart IP67 charger attempts to charge a deeply discharged battery by forcing it to a low charging current. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.

Also charges Li-ion batteries. Li-ion batteries are charged using a simple bulk – absorption – float algorithm.