Victron Energy Blue Solar MPPT charge controller 10A

Battery controller for solar panels with both 12/24V
Maximum battery current 10A
12V Max 145W
24V Max 290W

Ultra-fast maximum power point tracking (MPPT)
Especially in cloudy weather, when light intensity is constantly changing, a very fast MPPT controller can improve energy use by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

Output power
Excessive battery discharge can be prevented by connecting all loads to the load socket. The load connector disconnects the load when the battery has discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected: Reference to battery life.

The load connection is short-circuit protected.
Some loads (especially inverters) are best connected directly to the battery and the inverter remote control is connected to the load socket. A special connection cable may be required, see the user manual.

Battery life: Intelligent battery management
When the solar charge controller is not sufficient to charge the battery to full capacity in a day, the result is that the battery constantly cycles from a "partially charged" state to a fully discharged state. This behavior (no regular full charging) will destroy a lead acid battery over weeks or months.

The battery life algorithm monitors the battery's charge status and increases the load shedding level (i.e., cut the load earlier) each day if necessary until the available solar energy is sufficient to fully charge the battery to 100%. From then on, the load level is modulated so that a near 100% charge is reached approximately once a week.

Resin-encased electronics
Protects electronic components from the environment

Automatic battery voltage detection
The MPPT 75/10 automatically switches to 12V or 24V systems.
Batteries AGM, lead and gel

Remote monitoring and control
You can remotely monitor and control the various functions of your Blue Solar MPPT charger by connecting a Bluetooth adapter and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installations – even when there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Wide Area Network) device.

Purchase the Bluetooth Smart Dongle (item no. 70840) and use the Victron app for wireless monitoring.