Charge Controllers
Solar panel charge controllers, such as MPPT and PWM, are a key part of solar energy systems, ensuring optimal charging and safe battery operation in different environments and needs.Charge Controllers group products
The solar panel charger collects energy from the solar panels and stores it in the batteries. With the latest and fastest technology, Smart Solar maximizes the energy collection and intelligently transfers it to the battery for full charging in the shortest possible time. Smart Solar maintains the battery condition and extends its service life.
MPPT: Ultra Fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of the solar panels, MPPT technology ensures that every bit of energy available from the solar panels is utilized and stored. This benefit is most noticeable in partly cloudy weather, where light intensity is constantly fluctuating.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the Smart Solar MPPT charger's various functions by connecting via Bluetooth and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) online service, you will have full access to the MPPT's features anytime, anywhere, and both services are free. In the case of a remote installation - even when there is no internet connection or phone signal nearby - you may be able to monitor the MPPT by pairing it via Bluetooth with a LoRaWAN (Long Range Wide Area Network) device, which is available as an accessory.
Load output
The smart load output function prevents damage caused by battery discharge. You can set the voltage level at which Smart Solar disconnects the load and thus prevents unnecessary battery discharge. And here comes the smart part: Smart Solar tries to reach 100% charge every day. If that is not possible - during bad weather - the device increases the cut-off voltage daily until it succeeds. We call this function BatteryLife because it maintains the health of the battery and extends its service life.
Specifications:
Maximum current: 30 amps
Rated power, 12 volts: 440 watts
Features:
- Very fast Maximum Power Point Tracking (MPPT).
- Advanced Max Power Point Detection in case of partial shading.
- Excellent conversion efficiency.
- Natural convection cooling.
- Automatic detection of battery voltage.
- Flexible loading algorithm.
- Overheating protection and power reduction at high temperatures.
• Three battery groups
• 100A
• 12-24V
The solar panel charger collects energy from the solar panels and stores it in the batteries. With the latest and fastest technology, Smart Solar maximizes the energy collection and intelligently transfers it to the battery for full charging in the shortest possible time. Smart Solar maintains the battery condition and extends its service life.
MPPT: Ultra Fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of the solar panels, MPPT technology ensures that every bit of energy available from the solar panels is utilized and stored. This benefit is most noticeable in partly cloudy weather, where light intensity is constantly fluctuating.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the Smart Solar MPPT charger's various functions by connecting via Bluetooth and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) online service, you will have full access to the MPPT's features anytime, anywhere, and both services are free. In the case of a remote installation - even when there is no internet connection or phone signal nearby - you may be able to monitor the MPPT by pairing it via Bluetooth with a LoRaWAN (Long Range Wide Area Network) device, which is available as an accessory.
Load output
The smart load output function prevents damage caused by battery discharge. You can set the voltage level at which Smart Solar disconnects the load and thus prevents unnecessary battery discharge. And here comes the smart part: Smart Solar tries to reach 100% charge every day. If that is not possible - during bad weather - the device increases the cut-off voltage daily until it succeeds. We call this function BatteryLife because it maintains the health of the battery and extends its service life.
Specifications:
Maximum current: 30 amps
Rated power, 12 volts: 440 watts
Features:
- Very fast Maximum Power Point Tracking (MPPT).
- Advanced Max Power Point Detection in case of partial shading.
- Excellent conversion efficiency.
- Natural convection cooling.
- Automatic detection of battery voltage.
- Flexible loading algorithm.
- Overheating protection and power reduction at high temperatures.
- Three battery groups
- 200A
- 12-24V
Low-cost PWM (Pulse Width Modulation) controller. Internal temperature sensor. Three-stage battery charging (bulk, absorption and float charging). Overcurrent protected. Short-circuit protected. Reverse polarity protection when connecting to solar panels and/or battery. Low output voltage disconnection.
• 10A
• PWM technology
• 12/24 volts
Maximum battery current 10A
12V Max 145W
24V Max 290W
Ultra-fast maximum power point tracking (MPPT)
Especially in cloudy weather, when light intensity is constantly changing, a very fast MPPT controller can improve energy use by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Output power
Excessive battery discharge can be prevented by connecting all loads to the load socket. The load connector disconnects the load when the battery has discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected: Reference to battery life.
The load connection is short-circuit protected.
Some loads (especially inverters) are best connected directly to the battery and the inverter remote control is connected to the load socket. A special connection cable may be required, see the user manual.
Battery life: Intelligent battery management
When the solar charge controller is not sufficient to charge the battery to full capacity in a day, the result is that the battery constantly cycles from a "partially charged" state to a fully discharged state. This behavior (no regular full charging) will destroy a lead acid battery over weeks or months.
The battery life algorithm monitors the battery's charge status and increases the load shedding level (i.e., cut the load earlier) each day if necessary until the available solar energy is sufficient to fully charge the battery to 100%. From then on, the load level is modulated so that a near 100% charge is reached approximately once a week.
Resin-encased electronics
Protects electronic components from the environment
Automatic battery voltage detection
The MPPT 75/10 automatically switches to 12V or 24V systems.
Batteries AGM, lead and gel
Remote monitoring and control
You can remotely monitor and control the various functions of your Blue Solar MPPT charger by connecting a Bluetooth adapter and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installations – even when there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Wide Area Network) device.
Purchase the Bluetooth Smart Dongle (item no. 70840) and use the Victron app for wireless monitoring.
- 10A
- MPPT technology
- 12/24 volts
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 10 amps
- Rated power, 12 volts: 145 watts
The solar charger collects energy from your solar panels and stores it in batteries. Using the latest and fastest technology, Smart Solar maximizes energy collection and intelligently distributes it to fully charge the battery in the shortest possible time. Smart Solar maintains the health of the battery and extends its lifespan.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 15 amps
- Rated power, 12 volts: 220 watts
The solar charger collects energy from your solar panels and stores it in batteries. Using the latest and fastest technology, Smart Solar maximizes energy collection and intelligently distributes it to fully charge the battery in the shortest possible time. Smart Solar maintains the health of the battery and extends its lifespan.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 20 amps
- Rated power, 12 volts: 290 watts
MPPT controller with built-in Bluetooth. Automatically selects 12 or 24 V as the voltage to be used. Max. panel power with 12 V battery is 440 W, with 24 V battery the max. panel power is 880 W.
Fully programmable Victron Energy MPPT controller. Automatically selects 12 or 24 V as the voltage to be used. The charge can be fed to the controller with a maximum voltage of 100 V and the controller utilizes very fast MPPT charging technology. Maximum charging current 30 A. The controller can be combined with other Victron Energy products.
- Protection against incorrect polarity
- Temperature compensated charging
- Can be used in conjunction with Victron Colour Control
- Suitable for AGM batteries
- Excellent choice for boat or caravan use
- Built-in Bluetooth ensures data viewing and programming via smartphone. With the app, you can see, among other things, real-time charging data from the solar panel and historical data going back 30 days.
- Manufacturer: Victron Energy
- MPPT controller with built-in Bluetooth
- Automatically selects 12 or 24 V as the operating voltage
- Maximum panel power with a 12V battery is 440 W
- Maximum panel power with a 24V battery is 880 W
