Sleipner
Sleipner -ryhmän tuotteet
Advanced bow thruster from Sleipner/Side-Power
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Pulling force 40-48kg
- For 8-10.5m boats
- Fiberglass tunnel with Ø125 diameter
Features:
- Child lock
- LED light when on
- The panel deactivates itself automatically after use
- Protection against unintentional use
- Round opening (standard instrument size)
- Installation from one side
- Complete with o-ring seal and connector
- Multi-voltage (12V & 24V)
- Control panel Joystick
- Water resistant (IP65 front panel)
- UV protected
- CE approved
- Compact design
- Modern design
- No visible screws
Advanced bow thruster from Sleipner/Side-Power
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Thrust 50-62kg
- For 8-11m boats
- Fiberglass tunnel with Ø140 diameter
Advanced bow thruster from Sleipner/Side-Power
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Pulling force 30-40kg
- Boat length: 6-8m
- Fiberglass tunnel with Ø125 diameter
Sleipner MIDI 203 KIT anchor winch 600 W
The Sleipner MIDI 203 KIT is a compact rope anchor winch kit for boats up to approximately 7.6 meters in length and weighing approximately 3 tons. The winch is designed to be mounted inside the transom, making it ideal for a neat and discreet installation.
The motor can be mounted freely in a 360-degree position, making installation easier, especially in tight spaces. Free fall, automatic stop and PWM control unit make lowering and raising the anchor controlled and effortless.
The kit includes an anchor winch, rope grommet, PWM control unit, fuse, control panel and necessary cables.
Controlled freefall
The free-fall function allows the anchor to be lowered quickly. The light resistance of the rope pulley keeps the fall controlled and helps prevent unnecessary rope release.
Automatic stop
The Autostop sensor detects when the anchor is approaching the up position. The winch first stops the anchor in the flushing position. The next press of the button raises the anchor completely.
A small brass ring mounted on the rope acts as an identifier for the autostop sensor.
PWM control
The PWM control unit takes care of the power control of the anchor winch. Starting the winch requires pressing two buttons simultaneously, which reduces the risk of accidental starting.
Features
- Complete 600W anchor winch kit
- Rope winch for internal installation
- Suitable for boats up to approximately 7.6 m
- Suitable for boats of approximately 3 tons
- Motor mounting position adjustable 360 ??degrees
- Controlled freefall function
- Automatic stop with sensor
- Flushing position before raising the anchor fully up
- PWM control unit
- Two-button safety start
Delivery content
- Sleipner MIDI 203 anchor winch
- Rope feed-through
- PWM control unit
- Fuse
- Control panel
- Cabling
Specifications
- Model MIDI 203 KIT
- Motor power 600 W
- Recommended maximum boat length approximately 7.6 m
- Recommended maximum boat weight approximately 3 tons
- Installation method inside the transom
- Anchor winch package for rope
- For boats up to 7.5 m (600 W)
- For indoor installation
Side current delay relay.
- Voltage: 12/24V
Complete anchor winch package 1000W: Delivered as a ready-made package that includes the parts required for installation, such as control, fuse and cabling.
For boats up to 15 meters: Powerful 1000W solution for medium-sized boats, up to approximately 15m / 50 feet.
For indoor installation, flexible placement: The motor and pulley can be installed freely at a 360° angle, making it easier to find a suitable installation location on the boat.
Easy-to-use functions for anchoring: Equipped with auto-stop, free-fall function and PWM controller for power control.
Safe and controlled operation: Starting requires pressing two buttons simultaneously, which reduces the risk of accidental starting. Free fall allows for controlled lowering of the anchor.
The Sleipner Maxi 43 1000W is an inboard anchor winch that makes anchoring easier and more controlled. The motor and pulley can be mounted at any angle within a 360° radius, making it easier to find a practical place for the winch in the boat. In the Maxi 43 model, the pulley is located on the starboard side, looking towards the direction of travel of the boat.
The Sleipner Maxi 43 is a more powerful alternative to the Sleipner MIDI 600W anchor winch, for example. It is suitable for larger boats, frequent anchoring or when a more robust solution for indoor installation is desired.
Functions and use
The free-fall function allows the anchor to be lowered quickly. The pulley also provides light resistance, keeping the fall controlled. This also helps to avoid unnecessary slack in the rope.
The anchor windlass has an automatic stop with a sensor that detects when the anchor is up. The windlass first stops in the flushing position, and with a second push the anchor is raised completely. A small brass ring is installed on the rope, which activates the automatic stop sensor.
The PWM controller takes care of power regulation and control of the winch electronics. Starting requires pressing two buttons simultaneously, which acts as a safety feature and reduces the risk of accidental starting.
When is the Sleipner Maxi 43 KIT 1000W a good choice?
The Sleipner Maxi 43 KIT 1000W is suitable for the boater who needs a complete rope anchor winch package for indoor installation and wants an efficient solution for a boat up to 15 meters. It is also a good choice when the installation location requires flexible placement, as the motor and rope pulley can be installed at a 360° angle.
The Maxi 43 is especially suitable for users who value fast anchor lowering, controlled operation and an automatic stop that makes it easier to raise the anchor back up.
Package contents
Anchor winch
Rope frame feedthrough
PWM controller
Automatic fuse 150A
Control panel 70x70mm, gray
Cables 7m
- Power: 1000W
- Voltage: 12V DC
- Boat size: up to 15 meters / 50 feet
- Installation: internal installation, inside the transom
- Rope pulley: on the starboard side when viewed in the direction of travel of the boat
- Height: 238mm / 9.3"
- Length: 393mm / 15.4"
- Width: 219mm / 8.6"
- Weight: 20kg
- Rope diameter: 14–16mm, breaking strength 3300–4000daN
- Recommended fuse: 150A
- Functions: automatic stop, free fall function, PWM controller with power adjustment
Sleipner bow thruster
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Pulling force 25-30kg
- Boat length less than 7m
- Fiberglass tunnel Ø110
Advanced bow thruster from Sleipner/Side-Power
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Thrust 60-73kg
- For 8-11m boats
- Fiberglass tunnel with Ø185 diameter
Sleipner/Side-Power's advanced bow thruster
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust Smooth and powerful thrust in both directions thanks to two propellers
Other advantages of this bow thruster
- Easy installation
- Operates on 12V direct current (DC)
- Flexible coupling between engine and shaft - protects the drivetrain if foreign objects hit the propeller
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Pulling force 110-116kg
- For boats 12-17m
- Fiberglass tunnel with Ø185 diameter
Sleipner/Side-Power's advanced bow thruster
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
- Smooth and powerful thrust in both directions thanks to two propellers
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Flexible coupling between engine and shaft - protects the drivetrain if foreign objects hit the propeller
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
- Thrust 80-96kg
- For 10-15m boats
- Fiberglass tunnel with Ø185 diameter
Compact control panel
Features:
- Circular cut: Standard size instrument
- Installation: Installed from one side
- Sealing: Equipped with O-ring and connection
- Multi-voltage: 12 & 24 V
- Child safety: Yes
- LED light: On startup
- Automatic deactivation: The panel automatically turns off after use
- Safety: Protects against accidental start-up
- Waterproof: IP65 front panel
- UV protection: Yes
- CE approved: Yes
- Compact construction: Modern design without visible screws
- Built-in depth: 50 mm
- For bow thruster
- On/Off
- Square shape
For Sleipner/Side-Power
- Suitable for 4hp 94-, 6hp, 7hp, SP55, SE60
- Rustproof
- 5x28mm.
Dual joystick control panel for Sleipner / Side Power propeller
- Round cut (standard size)
- Installation from one side
- Equipped with O-ring seal and connector
- Multi-voltage (12 & 24V)
- Child lock
- LED light on
- The panel turns off automatically after use.
- Protection against accidental use
- Waterproof (IP65 front panel)
- UV protected
- CE approved
- Compact design
- Modern design
- No visible screws
- Installation from one side
- Multi-voltage (12 & 24V)
- Waterproof (IP65 front panel)
Side-Power emergency/main switch
Main switch or emergency stop that fits all Side-Power bow thrusters. The main switch does not have an integrated fuse holder, so it must be supplemented with a separate fuse holder.
- 250A
- Pulley kit, female and male
- Spare part for Sleipner/Engbo Maxi windlass
- Fits part numbers 44-12110, 44-24115
- Material: Aluminum alloy with zinc and indium (Al-Zn-In)
- Fits models: SE25, SE30, SE40
- Older models: SP30, SP35, SP40
- Diameter: 0.95" (25mm)
- Thickness: 0.59" (15mm)
- Locking screw: Included
- Locking screw dimensions: 5x12 mm
4-pin control cable for Sleipner/Side-Power bow thruster.
This cable is specifically designed for connecting and controlling Side-Power bow thrusters. The four-pin design allows for easy installation and secure communication between the control system and the bow thruster. The cable is durable and strong, ensuring reliable operation even in demanding conditions. The connectors are of high quality, ensuring a stable and efficient connection.
4-pin control cable for Sleipner/Side-Power bow thruster
This cable is specifically designed for connecting and controlling Side-Power bow thrusters. The four-pin design allows for easy installation and secure communication between the control system and the bow thruster. The cable is durable and strong, ensuring reliable operation even in demanding conditions. The connectors are of high quality, ensuring a stable and efficient connection.
- Length: 7m
Sleipner/Side-Power emergency/main switch 125 amps. Main switch and emergency switch that fits all Side-Power bow thrusters. The main switch does not have an integrated fuse holder, so it must be supplemented with an external one.
- Current: 125A
