Battery Chargers
Wide selection of battery chargers for charging different types of batteries. battery chargers, smart chargers, and CTEK chargers available in our online store!Battery Chargers -ryhmän tuotteet

Smart charger functions! The Phoenix Smart Charger IP43 is a six-stage charger that takes care of your batteries safely and gives them optimal charging.
With built-in Bluetooth, this wireless charger offers ease of use for charging batteries. Here are some features that make it an essential tool for boaters and other enthusiasts:
- Smart charging options for every need:
- Smart (1+1): Dual outputs for two battery banks. The second output is for the starter battery and provides up to 4A.
- Customized charging for batteries as needed:
- 6-stage customizable charging algorithm: From bulk charging to storage, each stage is automatically optimized to extend battery life.
- Variable Absorption Time: Adapts to the usage situation to prevent overcharging and maximize battery life.
- Protect your batteries with smart safety features: BatterySafe Mode: Prevents damage due to gassing by automatically adjusting the voltage rise. Storage Mode: Minimizes gassing and corrosion when the battery is not used for 24 hours, extending battery life.
- Remote control and monitoring via Bluetooth.
- Bluetooth Control: Complete control over voltage and current via Bluetooth directly from your phone.
With up to 50A charging capacity, our Smart IP43 charger offers a versatile and intelligent solution for all your charging needs.
Power cord must be purchased separately.
- 50A/12V
- Smart & Bluetooth
- 2 outputs
- For lead and lithium batteries

The waterproof Blue Smart IP67 battery charger also charges lithium-ion (LiFePO?) batteries with built-in Bluetooth so you can monitor the status of the charger and battery via your smartphone, tablet or laptop using the VictronConnect app.
The charger features a customizable 5-stage charging algorithm (bulk, absorption, recovery, float, storage). The Blue Smart charger features microprocessor-controlled customizable battery management. The customization feature automatically optimizes the process based on battery usage.
It is fully encapsulated, so water, oil or dirt will not damage the charger. The housing is made of cast aluminum and the electronics are embedded in resin.
It has two LEDs that indicate the charging status. Yellow LED: bulk charging (fast flashing), absorption (slow flashing), float (steady on), storage (off). Green LED: power on.
The IP67 charger consumes 95% or more of the efficiency, generating three to four times less heat. When the battery is fully charged, the power consumption is less than one watt, which is five to ten times better than the industry standard.
Unlike many other chargers, Victron's Blue Smart IP67 charger also attempts to charge completely discharged batteries with a low current initially. Normal charging then resumes as soon as the battery terminals have reached sufficient voltage.
Specifications:
Charging current, normal mode: 13A
Charging current, LOW: 4A
Efficiency: 95%
Battery connection: Black and red cable, 1.5m
Protection class: IP67
Weight: 1.8kg
HxWxD: 85x211x60mm
Charging voltage "absorption": Normal: 14.4V, High: 14.7V, Li-ion: 14.2V
Charging voltage "float": Normal: 13.8V, High: 13.8V, Li-ion: 13.5V
Charging voltage "storage": Normal: 13.2V, High: 13.2V, Li-ion: 13.5V
The Blue Smart charger uses a special charging algorithm for charging Li-ion (LiFePO?) batteries, utilizing automatic Li-ion voltage protection reset.
- 13A/12V
- Bluetooth
- Suitable for Lead, AGM, Gel and Li-ion (LiFePO) batteries

Charging indicator with M8 loop connection. Accessory for Blue Smart IP65 chargers. Includes 30 amp fuse.
• Displays battery charging status
• Fuse: 30A
• Fits Blue Smart IP65 charger

The Blue Smart IP65 13A 24V charger is a new professional battery charger with built-in Bluetooth. The charger can be used in the workshop and in motor vehicles such as boats, caravans and trucks with a 24V system.
The charger fully charges the battery. The seven-stage charging algorithm gets the most out of your battery. The charger delivers the necessary power to the battery, maintaining its condition and ensuring better performance and longer life.
Reviving completely discharged, "dead" batteries. Unlike other brands, the Blue Smart IP65 charger attempts to charge completely discharged batteries at first with a low current. After that, normal charging resumes as soon as the voltage at the battery terminals is high enough.
Connecting the battery is easy. The charger comes with both alligator clips and M8 eyelets, making it easy to connect the battery. You can keep the battery connected at all times if you want.
Keep your battery status under control remotely. The Blue Smart IP65 charger has built-in Bluetooth, allowing you to monitor the status of the charger and battery via your smartphone, tablet or laptop. All charger settings can be made using the VictronConnect app.
Water, dust and chemical resistant. Intelligent seven-stage charging algorithm. Resuscitation of completely discharged, "dead" batteries. Automatic power supply function. Performance in severe cold conditions: down to -30 °C. Several features to improve service life. Low-power setting for charging smaller batteries. Lithium battery mode. Bluetooth Smart allows you to make settings and configure, read voltage and current.
- 13A/24V
- Bluetooth
- Portable
- Suitable for Lead, AGM, Gel and Li-ion (LiFePO) batteries
- IP65 24V 13A: 75x140x240mm
- Weight: 1.9kg
- 5 year warranty

The Blue Smart IP65 7A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.
The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.
The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.
Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.
- Rated voltage: 12V
- Charging current: 7A
- Charging slots: 1pc
- Bluetooth: Yes
- Power supply mode: Yes
- Programmable: Yes
- IP class: IP65
- Waterproof, dustproof and chemical resistant
- Intelligent seven-stage charging algorithm
- Recovering completely discharged "dead" batteries
- Automatic power supply function
- Excellent cold performance: down to -30°C
- Several other features related to extending battery life
- Low power mode for charging small batteries
- Li-ion battery status Set and configure, read voltage and current
- Highly efficient "green" battery charger with Bluetooth Smart technology
- Suitable for Lead and Lithium batteries

The Blue Smart IP65 15A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.
The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.
The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.
Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.
- Rated voltage: 12V
- Charging current: 15A
- Charging points: 1pc
- Bluetooth: Yes
- Power supply mode: Yes
- Programmable: Yes
- IP class: IP65
- Dimensions: 6 x 10.5 x 19cm (H x W x D)
- Waterproof, dustproof and chemical resistant
- Intelligent seven-stage charging algorithm
- Recovering completely discharged "dead" batteries
- Automatic power supply function
- Excellent cold performance: down to -30°C
- Several other features related to extending battery life
- Low power mode for charging small batteries
- Li-ion battery status Set and configure, read voltage and current
- Highly efficient "green" battery charger with Bluetooth Smart technology
- Suitable for Lead and Lithium batteries

The Blue Smart IP65 25A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.
The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.
The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.
Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.
- Rated voltage: 12V
- Charging current: 25A
- Charging points: 1pc
- Bluetooth: Yes
- Power supply mode: Yes
- Programmable: Yes
- IP class: IP65
- Dimensions: 7.5 x 14 x 24cm (H x W x D)
- Waterproof, dustproof and chemical resistant
- Intelligent seven-stage charging algorithm
- Recovering completely discharged "dead" batteries
- Automatic power supply function
- Excellent cold performance: down to -30°C
- Several other features related to extending battery life
- Low power mode for charging small batteries
- Li-ion battery status Set and configure, read voltage and current
- Highly efficient "green" battery charger with Bluetooth Smart technology
- Suitable for Lead and Lithium batteries

The fully waterproof Blue Smart IP67 is a new 17A professional charger that also charges lithium batteries (LiFePo). With built-in Bluetooth connectivity, you can monitor the charger's status from your smartphone, tablet or computer using the VictronConnect app.
Adaptive 5-stage charging algorithm (bulk - absorption - conditioning - float - storage). The Blue Smart charger has a microprocessor-controlled battery management. The feature automatically adapts the charging process according to how the battery is used.
Fully encapsulated and shockproof, so water, oil or dirt will not damage the charger. The housing is cast aluminum and the electronics are molded in resin.
Two LEDs to indicate charging status. Yellow LED: bulk charging (flashing fast), absorption (flashing slow), float (continuously on) and storage (off). Green LED: power on
High efficiency: With over 95% efficiency, Blue Smart chargers generate three to four times less heat. When the battery is fully charged, power consumption drops to less than one watt, which is five to ten times better than the industry standard.
Unlike many other brands of chargers, the Blue Smart IP67 charger attempts to charge a deeply discharged battery by forcing it to a low charging current. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.
Also charges Li-ion batteries. Li-ion batteries are charged using a simple bulk – absorption – float algorithm.
- Rated voltage: 12V
- Charging current (normal): 17A
- Charging current (low): 6A
- Charging points: 1pc
- Bluetooth: Yes
- Power supply mode: Yes
- Programmable: Yes
- IP rating: IP67
- Efficiency: 95%
- Battery connections: black and red cable 1.5m
- Weight: 2.4kg
- Dimensions: 99 x 219 x 65mm (HxWxD)
- Fully encapsulated, electronics molded in resin
- Intelligent five-stage charging algorithm
- Recovering completely discharged "dead" batteries
- Automatic power supply function
- Li-ion batteries are charged using a simple bulk – absorption – float algorithm
- Excellent cold performance: down to -30°C
- Several other features related to extending battery life
- Highly efficient "green" battery charger with Bluetooth Smart technology
- Suitable for Lead, AGM, Gel and Lithium batteries

The Blue Smart IP22 Charger is a new powerful professional 15A battery charger with a single output, with integrated Bluetooth technology for easy use and control. The Blue Smart IP22 Charger is ideal for use in vehicles such as boats, classic cars, motorcycles and caravans. Bluetooth Smart is a wireless solution for monitoring voltage and current, changing settings and updating the charger as new features become available.
The most efficient charger Victron has ever made. Up to 94% efficiency produces up to four times less heat than the industry standard. When the battery is fully charged, power consumption is reduced to 0.5 watts. The charger can also charge lithium batteries. Housing IP 22.
Adaptive 6-stage charging algorithm : test - bulk - absorption - reconditioning - float - storage. The Blue Smart Charger features a microprocessor-controlled "adaptive" battery management. The adaptive feature automatically optimizes the charging process according to how the battery is being used. The feature optimizes current and voltage to charge the battery efficiently and safely, and protects the battery from damage and overheating. The output current decreases when the temperature rises to 50 °C, but the Blue Smart charger does not fail.
NIGHT and Low setting. When in NIGHT or Low mode, the output current is reduced to a maximum of 50% of the rated current and the charger is completely silent. NIGHT mode ends automatically after 8 hours. Low mode can be ended manually.
Also suitable for Li-ion batteries. Li-ion batteries are charged using a simple bulk - absorption - float algorithm.
Eleven LEDs to indicate status i. Charging algorithm: TEST / BULK / ABSORPTION / RECOVERY / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECOVERY / LI-ION.
Victron Energy Smart Network is a wireless device-to-device communication network between Victron products using Bluetooth Smart. Optional battery voltage and temperature compensation and current sensing VE.Smart Network opens up the possibility to optimize the charging process: Smart Battery Sense, Smart Battery Monitor or SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. Smart Battery Monitor or SmartShunt also communicates battery current.
Synchronize up to ten battery chargers in a Victron Energy Smart network to charge the battery as if they were one large charger. The chargers synchronize their charging algorithms with each other and simultaneously switch between charging modes, for example from bulk to absorption.
- Voltage range, input: 180-265 VAC
- Charging current, normal setting: 15A
- Charging current, NIGHT or LOW: 7.5A
- Efficiency: 93%
- Power consumption - no load: 0.5 W
- Frequency: 45 - 65 Hz
- Outputs: 1 pc.
- Charging voltage "absorption": Normal: 14.4 V. High: 14.7 V. Li-ion: 14.2 V
- Charging voltage "float": Normal: 13.8 V. High: 13.8 V. Li-ion: 13.5 V
- Charging voltage "storage" Normal: 13.2 V. High: 13.2 V. Li-ion: 13.5 V
- Charging algorithm: 6-stage adaptive
- Can be used as a power source: Yes
- Protection: Battery reverse polarity (fuse), short circuit output, overheating, operating temperature
- Operating temperature: -40 to +60 °C (full rated power up to 40 °C)
- Humidity (non-condensing): Max 98%
- Material and color: aluminum (blue RAL 5012). IP22 enclosure.
- Battery connection: Screw terminals 16 mm² / AWG6
- 230 VAC connection: 1.5 m cable with CEE 7/7 connector
- Protection class: IP22
- Weight: 1.3Kg
- Dimensions: 235 x 108 x 65 mm (HxWxD)
- Suitable for Lead and Lithium batteries

The Blue Smart IP22 Charger is a new powerful professional 15A battery charger with three outputs, featuring integrated Bluetooth technology for easy use and control. The Blue Smart IP22 Charger is ideal for use in vehicles such as boats, classic cars, motorcycles and caravans. Bluetooth Smart is a wireless solution for monitoring voltage and current, changing settings and updating the charger as new features become available.
The most efficient charger Victron has ever made. Up to 94% efficiency produces up to four times less heat than the industry standard. When the battery is fully charged, power consumption is reduced to 0.5 watts. The charger can also charge lithium batteries. Housing IP 22.
Adaptive 6-stage charging algorithm : test - bulk - absorption - reconditioning - float - storage. The Blue Smart Charger features a microprocessor-controlled "adaptive" battery management. The adaptive feature automatically optimizes the charging process according to how the battery is being used. The feature optimizes current and voltage to charge the battery efficiently and safely, and protects the battery from damage and overheating. The output current decreases when the temperature rises to 50 °C, but the Blue Smart charger does not fail.
NIGHT and Low setting. When in NIGHT or Low mode, the output current is reduced to a maximum of 50% of the rated current and the charger is completely silent. NIGHT mode ends automatically after 8 hours. Low mode can be ended manually.
Also suitable for Li-ion batteries. Li-ion batteries are charged using a simple bulk - absorption - float algorithm.
Eleven LEDs to indicate status i. Charging algorithm: TEST / BULK / ABSORPTION / RECOVERY / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECOVERY / LI-ION.
Victron Energy Smart Network is a wireless device-to-device communication network between Victron products using Bluetooth Smart. Optional battery voltage and temperature compensation and current sensing VE.Smart Network opens up the possibility to optimize the charging process: Smart Battery Sense, Smart Battery Monitor or SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. Smart Battery Monitor or SmartShunt also communicates battery current.
Synchronize up to ten battery chargers in a VE.Smart network to charge the battery as if they were one large charger. The chargers synchronize their charging algorithms with each other and simultaneously switch from one charging mode to another, for example from bulk to absorption.
- Voltage range, input: 180-265 VAC
- Charging current, normal setting: 15A
- Charging current, NIGHT or LOW: 7.5A
- Efficiency: 93%
- Power consumption - no load: 0.5 W
- Frequency: 45 - 65 Hz
- Outputs: 3 pcs.
- Charging voltage "absorption": Normal: 14.4 V. High: 14.7 V. Li-ion: 14.2 V
- Charging voltage "float": Normal: 13.8 V. High: 13.8 V. Li-ion: 13.5 V
- Charging voltage "storage" Normal: 13.2 V. High: 13.2 V. Li-ion: 13.5 V
- Charging algorithm: 6-stage adaptive
- Can be used as a power source: Yes
- Protection: Battery reverse polarity (fuse), short circuit output, overheating, operating temperature
- Operating temperature: -40 to +60 °C (full rated power up to 40 °C)
- Humidity (non-condensing): Max 98%
- Material and color: aluminum (blue RAL 5012). IP22 enclosure.
- Battery connection: Screw terminals 16 mm² / AWG6
- 230 VAC connection: 1.5 m cable with CEE 7/7 connector
- Protection class: IP22
- Weight: 1.3Kg
- Dimensions: 235 x 108 x 65 mm (HxWxD)

The Blue Smart IP22 Charger is a new powerful professional 20A battery charger with a single output, with integrated Bluetooth technology for easy use and control. The Blue Smart IP22 Charger is ideal for use in vehicles such as boats, classic cars, motorcycles and caravans. Bluetooth Smart is a wireless solution for monitoring voltage and current, changing settings and updating the charger as new features become available.
The most efficient charger Victron has ever made. Up to 94% efficiency produces up to four times less heat than the industry standard. When the battery is fully charged, power consumption is reduced to 0.5 watts. The charger can also charge lithium batteries. Housing IP 22.
Adaptive 6-stage charging algorithm : test - bulk - absorption - reconditioning - float - storage. The Blue Smart Charger features a microprocessor-controlled "adaptive" battery management. The adaptive feature automatically optimizes the charging process according to how the battery is being used. The feature optimizes current and voltage to charge the battery efficiently and safely, and protects the battery from damage and overheating. The output current decreases when the temperature rises to 50 °C, but the Blue Smart charger does not fail.
NIGHT and Low setting. When in NIGHT or Low mode, the output current is reduced to a maximum of 50% of the rated current and the charger is completely silent. NIGHT mode ends automatically after 8 hours. Low mode can be ended manually.
Also suitable for Li-ion batteries. Li-ion batteries are charged using a simple bulk - absorption - float algorithm.
Eleven LEDs to indicate status i. Charging algorithm: TEST / BULK / ABSORPTION / RECOVERY / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECOVERY / LI-ION.
Victron Energy Smart Network is a wireless device-to-device communication network between Victron products using Bluetooth Smart. Optional battery voltage and temperature compensation and current sensing VE.Smart Network opens up the possibility to optimize the charging process: Smart Battery Sense, Smart Battery Monitor or SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. Smart Battery Monitor or SmartShunt also communicates battery current.
Synchronize up to ten battery chargers in a Victron Energy Smart network to charge the battery as if they were one large charger. The chargers synchronize their charging algorithms with each other and simultaneously switch between charging modes, for example from bulk to absorption.
- Rated voltage: 12V
- Voltage range, input: 180-265 VAC
- Charging current, normal setting: 20A
- Charging current, NIGHT or LOW: 10A
- Efficiency: 93%
- Power consumption - no load: 0.5 W
- Frequency: 45 - 65 Hz
- Outputs: 1 pc.
- Charging voltage "absorption": Normal: 14.4 V. High: 14.7 V. Li-ion: 14.2 V
- Charging voltage "float": Normal: 13.8 V. High: 13.8 V. Li-ion: 13.5 V
- Charging voltage "storage" Normal: 13.2 V. High: 13.2 V. Li-ion: 13.5 V
- Charging algorithm: 6-stage adaptive
- Can be used as a power source: Yes
- Protection: Battery reverse polarity (fuse), short circuit output, overheating, operating temperature
- Operating temperature: -40 to +60 °C (full rated power up to 40 °C)
- Humidity (non-condensing): Max 98%
- Material and color: aluminum (blue RAL 5012). IP22 enclosure.
- Battery connection: Screw terminals 16 mm² / AWG6
- 230 VAC connection: 1.5 m cable with CEE 7/7 connector
- Protection class: IP22
- Weight: 1.3Kg
- Dimensions: 235 x 108 x 65 mm (HxWxD)
- Suitable for Lead and Lithium batteries

The Blue Smart IP22 Charger is a new powerful professional 20A battery charger with three outputs, featuring integrated Bluetooth technology for easy use and control. The Blue Smart IP22 Charger is ideal for use in vehicles such as boats, classic cars, motorcycles and caravans. Bluetooth Smart is a wireless solution for monitoring voltage and current, changing settings and updating the charger as new features become available.
The most efficient charger Victron has ever made. Up to 94% efficiency produces up to four times less heat than the industry standard. When the battery is fully charged, power consumption is reduced to 0.5 watts. The charger can also charge lithium batteries. Housing IP 22.
Adaptive 6-stage charging algorithm : test - bulk - absorption - reconditioning - float - storage. The Blue Smart Charger features a microprocessor-controlled "adaptive" battery management. The adaptive feature automatically optimizes the charging process according to how the battery is being used. The feature optimizes current and voltage to charge the battery efficiently and safely, and protects the battery from damage and overheating. The output current decreases when the temperature rises to 50 °C, but the Blue Smart charger does not fail.
NIGHT and Low setting. When in NIGHT or Low mode, the output current is reduced to a maximum of 50% of the rated current and the charger is completely silent. NIGHT mode ends automatically after 8 hours. Low mode can be ended manually.
Also suitable for Li-ion batteries. Li-ion batteries are charged using a simple bulk - absorption - float algorithm.
Eleven LEDs to indicate status i. Charging algorithm: TEST / BULK / ABSORPTION / RECOVERY / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECOVERY / LI-ION.
Victron Energy Smart Network is a wireless device-to-device communication network between Victron products using Bluetooth Smart. Optional battery voltage and temperature compensation and current sensing VE.Smart Network opens up the possibility to optimize the charging process: Smart Battery Sense, Smart Battery Monitor or SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. Smart Battery Monitor or SmartShunt also communicates battery current.
Synchronize up to ten battery chargers in a Victron Energy Smart network to charge the battery as if they were one large charger. The chargers synchronize their charging algorithms with each other and simultaneously switch between charging modes, for example from bulk to absorption.
- Voltage range, input: 180-265 VAC
- Charging current, normal setting: 20A
- Charging current, NIGHT or LOW: 10A
- Efficiency: 93%
- Power consumption - no load: 0.5 W
- Frequency: 45 - 65 Hz
- Outputs: 3 pcs.
- Charging voltage "absorption": Normal: 14.4 V. High: 14.7 V. Li-ion: 14.2 V
- Charging voltage "float": Normal: 13.8 V. High: 13.8 V. Li-ion: 13.5 V
- Charging voltage "storage" Normal: 13.2 V. High: 13.2 V. Li-ion: 13.5 V
- Charging algorithm: 6-stage adaptive
- Can be used as a power source: Yes
- Protection: Battery reverse polarity (fuse), short circuit output, overheating, operating temperature
- Operating temperature: -40 to +60 °C (full rated power up to 40 °C)
- Humidity (non-condensing): Max 98%
- Material and color: aluminum (blue RAL 5012). IP22 enclosure.
- Battery connection: Screw terminals 16 mm² / AWG6
- 230 VAC connection: 1.5 m cable with CEE 7/7 connector
- Protection class: IP22
- Weight: 1.3Kg
- Dimensions: 235 x 108 x 65 mm (HxWxD)
- Suitable for Lead and Lithium batteries

The Blue Smart IP22 Charger is a new powerful professional 30A battery charger with a single output, featuring integrated Bluetooth technology for easy use and control. The Blue Smart IP22 Charger is ideal for use in vehicles such as boats, classic cars, motorcycles and caravans. Bluetooth Smart is a wireless solution for monitoring voltage and current, changing settings and updating the charger as new features become available.
The most efficient charger Victron has ever made. Up to 94% efficiency produces up to four times less heat than the industry standard. When the battery is fully charged, power consumption is reduced to 0.5 watts. The charger can also charge lithium batteries. Housing IP 22.
Adaptive 6-stage charging algorithm : test - bulk - absorption - reconditioning - float - storage. The Blue Smart Charger features a microprocessor-controlled "adaptive" battery management. The adaptive feature automatically optimizes the charging process according to how the battery is being used. The feature optimizes current and voltage to charge the battery efficiently and safely, and protects the battery from damage and overheating. The output current decreases when the temperature rises to 50 °C, but the Blue Smart charger does not fail.
NIGHT and Low setting. When in NIGHT or Low mode, the output current is reduced to a maximum of 50% of the rated current and the charger is completely silent. NIGHT mode ends automatically after 8 hours. Low mode can be ended manually.
Also suitable for Li-ion batteries. Li-ion batteries are charged using a simple bulk - absorption - float algorithm.
Eleven LEDs to indicate status i. Charging algorithm: TEST / BULK / ABSORPTION / RECOVERY / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECOVERY / LI-ION.
Victron Energy Smart Network is a wireless device-to-device communication network between Victron products using Bluetooth Smart. Optional battery voltage and temperature compensation and current sensing VE.Smart Network opens up the possibility to optimize the charging process: Smart Battery Sense, Smart Battery Monitor or SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. Smart Battery Monitor or SmartShunt also communicates battery current.
Synchronize up to ten battery chargers in a Victron Energy Smart network to charge the battery as if they were one large charger. The chargers synchronize their charging algorithms with each other and simultaneously switch between charging modes, for example from bulk to absorption.
- Rated voltage: 12V
- Voltage range, input: 180-265 VAC
- Charging current, normal setting: 30A
- Charging current, NIGHT or LOW: 150A
- Efficiency: 93%
- Power consumption - no load: 0.5 W
- Frequency: 45 - 65 Hz
- Outputs: 1 pc.
- Charging voltage "absorption": Normal: 14.4 V. High: 14.7 V. Li-ion: 14.2 V
- Charging voltage "float": Normal: 13.8 V. High: 13.8 V. Li-ion: 13.5 V
- Charging voltage "storage" Normal: 13.2 V. High: 13.2 V. Li-ion: 13.5 V
- Charging algorithm: 6-stage adaptive
- Can be used as a power source: Yes
- Protection: Battery reverse polarity (fuse), short circuit output, overheating, operating temperature
- Operating temperature: -40 to +60 °C (full rated power up to 40 °C)
- Humidity (non-condensing): Max 98%
- Material and color: aluminum (blue RAL 5012). IP22 enclosure.
- Battery connection: Screw terminals 16 mm² / AWG6
- 230 VAC connection: 1.5 m cable with CEE 7/7 connector
- Protection class: IP22
- Weight: 1.3Kg
- Dimensions: 235 x 108 x 65 mm (HxWxD)
- Suitable for Lead and Lithium batteries

The Blue Smart IP22 Charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP22 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
- Bluetooth
- 3 starts
- Suitable for Lead and Lithium batteries

Orion-Tr Smart 12/12-18A (220W) is an isolated DC-DC adaptive 3-phase charger with built-in Bluetooth.
Remote control: With a remote control, a high-voltage switch is not required for the input cables.
The remote control can be controlled with a low-voltage switch or, for example, with the motor's on/off switch.
- Adjustable output voltage: 10-15V
- Short-circuit protected
- Can be connected in parallel
- IP43 protection when the device is installed with the screw fasteners facing downwards
- No special tools required for installation
- Input fuse
- Built-in Bluetooth
- Voltage range: 8-17V
- Output voltage adjustment range: 10-15V
- Continued. output power at 40°C: 220W
- Dimensions (hxwxd): 130x186x70mm
- Weight: 1.3Kg
- For lead and lithium batteries

The Orion-Tr Smart 12/12-30A(360W) Isolated DC/DC Charger is a DC-DC adaptive 3-phase charger with built-in Bluetooth.
Remote control: With a remote control, a high-voltage switch is not required for the input cables.
The remote control can be controlled with a low-voltage switch or, for example, with the motor's on/off switch.
• Adjustable output voltage: 10-15V
• Short-circuit protected
• Can be connected in parallel
• IP43 protection when the device is installed with the screw fasteners facing downwards.
• Installation does not require special tools
• Input fuse
- Built-in Bluetooth
- Voltage range: 8-17V
- Output voltage adjustment range: 10-15V
- Continuous output power at 25°C: 430W
- Continuous output power at 40°C: 360W
- Dimensions (hxwxd): 130x186x70mm
- Weight: 1.3Kg
- Suitable for Lead and Lithium batteries

The Orion-Tr Smart 12/12-30A(360W) non-isolated DC/DC charger is a DC-DC adaptive 3-phase charger with built-in Bluetooth.
Remote control: With a remote control, a high-voltage switch is not required for the input cables.
The remote control can be controlled with a low-voltage switch or, for example, with the motor's on/off switch.
Adjustable output voltage: 10-15V
Short-circuit protected
Can be equated
IP43 protection when the device is installed with the screw fasteners facing downwards.
Installation does not require special tools
Fuse
- Built-in Bluetooth
- Voltage range: 10-17V
- Output voltage adjustment range: 10-15V
- Continuous output power at 25°C: 430W
- Continuous output power at 40°C: 360W
- Dimensions (hxwxd): 130x186x70mm
- Weight: 1.3Kg
- Suitable for Lead and Lithium batteries

The Blue Smart IP65 10A charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP65 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
The 7-stage charging algorithm maximizes the capabilities and performance of your battery. The charger delivers the charging current your battery needs, maintains battery health, ensures better performance, and extends battery life.
Unlike chargers from other manufacturers, the Blue Smart IP65 Charger attempts to charge a deeply discharged battery by forcing a low charging current into it. The charger switches to normal charging current as soon as a sufficiently high terminal voltage is measured across the battery terminals.
The charger comes with fishhook connectors and M8 ring connectors - connecting to the battery is really easy. If you want, you can connect the charger to the battery so-called permanently.
The Blue Smart IP65 is equipped with a built-in Bluetooth connection, which allows you to check the status of the charger and battery wirelessly using a smartphone, tablet or laptop. All charger settings can also be set wirelessly using the VictronConnect App.
Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO?) batteries with automatic Li-ion undervoltage protection reset.
- Rated voltage: 12V
- Charging current: 10A
- Charging points: 1pc
- Bluetooth: Yes
- Power supply mode: Yes
- Programmable: Yes
- IP class: IP65
- Waterproof, dustproof and chemical resistant
- Intelligent seven-stage charging algorithm
- Recovering completely discharged "dead" batteries
- Automatic power supply function
- Excellent cold performance: down to -30°C
- Several other features related to extending battery life
- Low power mode for charging small batteries
- Li-ion battery status Set and configure, read voltage and current
- Highly efficient "green" battery charger with Bluetooth Smart technology
- Suitable for Lead and Lithium batteries

2 meter extension cable with DC connector for Victron Blue Smart charger.
- Victron Blue Smart charger
- Length: 2 meters
- Protection class: IP65

CS FREE is the world's first fully portable battery charger with trickle charging and Adaptive Booster. It quickly and safely jump-starts your discharged battery without the need to connect it to the mains. In other words, it is a 12V power bank for your vehicle that works with both lead and lithium batteries (12V LiFePO4). It also keeps your portable tech devices like phones, laptops and cameras fully charged. Charge it, take it with you and use it anywhere!
- No need to be plugged into an outlet.
- The internal battery charges in 1 hour.
- Stays fully charged for up to a year.
- Adaptive Boost safely charges your dead battery in 15 minutes without damaging your vehicle's electronics.
- Charges and maintains lead and lithium batteries and keeps them in top condition.
- Easy to use - Clear and easy-to-read display
- Charge portable devices - smartphones, tablets, laptops, etc.
- Charges or operates on battery power and solar energy.
- Works with all 12V lead-acid batteries, AGM, EFB, Gel and LiFePo (lithium) batteries 10-130Ah.
- Charger
- Jump starter/Booster
- Backup power supply
- Available for purchase on the device
- Charging current: 5A when CS Free is connected to 220 volts and 20A.
- Internal battery (power bank): 66Wh
- USB-A (2.4A) and USB-C (3A)
- Enclosure: IP54
- Weight: 1.4 kg
- Dimensions: 248x98x78mm
- Cable length: 2 meters (charging cable), 1 meter (power cable)

