Bow thrusters
Bow thrusters and bow thruster kits from manufacturers such as Lewmar, Sleipner/Side Power, Quick and Max Power.Tuoteryhmät
Bow thrusters -ryhmän tuotteet
Bow thruster kit CT25
Experience: With over 20 years of experience in bow thrusters, MaxPower offers the widest range of bow thrusters today. MaxPower is used by several major boat manufacturers.
Features:
- Single propeller: Less water resistance when driving
- Composite gear: High durability.
- Efficient structure.
- Durable synthetic propeller: No corrosion.
- A gear unit made of composite material eliminates the need for anodes.
- Pull: Same pull in both directions.
- Efficient: Optimal performance.
- Installation: Clear and detailed installation and operating instructions.
Specifications:
- Power: 2.4hp
- Tunnel inner diameter: 110mm
- Weight without tunnel: 7.5kg
- Voltage: 12 volts DC
- Continuous use time: 2-3 minutes
- Main switch: 250A
- Battery cable, total length (+ and -):
- <5m (50mm²)
- <10m (70mm²)
The package includes:
- Bow thruster
- Joystick
- Tunnel
- Complete set including bow thruster, tunnel and joystick
- Power 2.4hp
- Suitable for boats under 7.5m
- Easy installation with 110 mm tunnel
Bow thruster Maxpower 3.6hp, 35 KP (10.75V)
With over 20 years of experience in bow thrusters, MaxPower offers the widest range of bow thrusters today. MaxPower is used by several major boat manufacturers. Suitable for boats from 5.5 to 10 meters long. Can be mounted both bow and stern, easy installation with 125mm tunnel. Gearbox made of composite material eliminates the need for zinc anodes.
Features:
- Single propeller: Less water resistance.
- Composite gear: High durability.
- Efficient structure.
- Durable synthetic propeller: No corrosion.
- Pull: Same pull in both directions.
- Efficient: Optimal performance.
- Installation: Clear and detailed installation and operating instructions.
Specifications
- Power: 3.6hp
- Tunnel inner diameter: 125mm
- Weight without tunnel: 9.6kg
- Voltage: 12 volts DC
- Continuous use time: 2-3 minutes
- Main switch: 250 A
- Battery cable, total length (+ and -):
- <5m (50mm²)
- <10m (70mm²)
- <15m (95mm²)
The package includes
- Bow thruster
- Joystick
- Tunnel
- Complete set including bow thruster, tunnel and joystick
- Power 3.6hp
- Suitable for boats 5.5–10m
Bow thruster Maxpower 4.3hp, 39 KP (10.75V)
Recommended for boats 6 - 12 meters long. Can be mounted both bow and stern, easy installation with 125mm tunnel. Composite gear unit eliminates the need for zinc anodes.
With over 20 years of experience in bow thrusters, MaxPower offers the widest range of bow thrusters today. MaxPower is used by several major boat manufacturers.
A gear unit made of composite material eliminates the need for zinc anodes.
Features:
- Twin propeller: Better traction.
- Composite gear: High durability.
- Efficient structure.
- Durable synthetic propeller: No corrosion.
- Pull: Same pull in both directions.
- Efficient: Optimal performance.
- Installation: Clear and detailed installation and operating instructions.
Specifications:
- Power: 4.3 hp
- Tunnel inner diameter: 125 mm
- Weight without tunnel: 9.6 kg
- Voltage: 12 volts DC
- Continuous use time: 2-3 minutes
- Main switch "slow": 250 A
- Battery cable, total length (+ and -):
- <5 m (50 mm²)
- <10 m (70 mm²)
- <15 m (95 mm²)
- Bow thruster for 125mm tunnel
- Power 4.3hp
- Suitable for boats 6 - 12m
Bow thruster Maxpower 5.8 hp, 58 KP (10.75 volts)
Recommended for boats 7 - 14 meters long. The gear unit made of composite material eliminates the need for zinc anodes.
With over 20 years of experience in bow thrusters, MaxPower offers the widest range of bow thrusters today. MaxPower is used by several major boat manufacturers.
Features:
- Single propeller: Less water resistance.
- Composite gear: High durability.
- Efficient structure.
- Durable synthetic propeller: No corrosion.
- Pull: Same pull in both directions.
- Efficient: Optimal performance.
- Installation: Clear and detailed installation and operating instructions.
Specifications:
- Power: 5.8hp
- Tunnel inner diameter: 185mm
- Weight without tunnel: 14.7kg
- Voltage: 12 volts DC
- Continuous use time: 2-3 minutes
- Main switch: 300A
- Battery cable, total length (+ and -):
- <5m (50mm²)
- <10m (70mm²)
- <15m (95mm²)
- <20m (120mm²)
- Bow thruster 185mm
- Power 5.8hp
- Suitable for boats 7 - 14m
Kampanja
Bow thruster Maxpower 6.4 hp, 69 KP (10.75 volts)
Recommended for boats 8 - 15 meters long. The gear unit made of composite material eliminates the need for zinc anodes.
With over 20 years of experience in bow thrusters, MaxPower offers the widest range of bow thrusters today. MaxPower is used by several major boat manufacturers.
Features:
- Single propeller: Less water resistance.
- Composite gear: High durability.
- Efficient structure.
- Durable synthetic propeller: No corrosion.
- Pull: Same pull in both directions.
- Efficient: Optimal performance.
- Installation: Clear and detailed installation and operating instructions.
Specifications:
- Power: 6.4hp
- Tunnel inner diameter: 185mm
- Weight without tunnel: 15kg
- Voltage: 12 volts DC
- Continuous use time: 2-3 minutes
- Main switch "slow": 400A
- Battery cable, total length (+ and -):
- <5m (50mm²)
- <10m (70mm²)
- <15m (95mm²)
- <20m (120mm²)
• Bow thruster for 185mm tunnel
• Power 6.4hp
• Suitable for boats 8 - 15m
Kampanja
Sleipner/Side-Power's advanced bow thruster
The SE100 is designed for larger boats, 12-17 meters, and with its 8.4 horsepower, it can easily move heavier boats.
The SE100 is equipped with two five-blade propellers designed for extremely quiet and efficient operation. Q-PROP™ technology has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust Smooth and powerful thrust in both directions thanks to two propellers
Sleipner/Side-Power bow thrusters are easy to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be rotated to make installation easier in tight spaces. The cables and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster
- Easy installation
- Operates on 12V direct current (DC)
- Flexible coupling between engine and shaft - protects the drivetrain if foreign objects hit the propeller
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
- Pulling force 110-116kg
- For boats 12-17m
- Fiberglass tunnel with Ø185 diameter
Kampanja
Sleipner/Side-Power's advanced bow thruster
The SE80 is intended for slightly larger boats, 10-15 meters, and with its 6 horsepower it can easily move heavier boats. The bow thruster can also be used as a stern thruster.
The SE80 is equipped with two five-blade propellers designed for extremely quiet and efficient operation. The Q-PROP™ technology has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
- Smooth and powerful thrust in both directions thanks to two propellers
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fibreglass tunnel. The motor can also be turned - all to make installation easier on boats where space is often limited. The cables and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Flexible coupling between engine and shaft - protects the drivetrain if foreign objects hit the propeller
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
- Thrust 80-96kg
- For 10-15m boats
- Fiberglass tunnel with Ø185 diameter
Kampanja
Advanced bow thruster from Sleipner/Side-Power
The SE60 is suitable for boats 8-11 meters long, it is very compact and efficient for a Ø185 tunnel.
The SE60 is equipped with a five-blade propeller designed for extremely quiet and efficient operation. The technology called Q-PROP™ has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be turned - all to make installation as smooth as possible, as space is often limited on boats. The special remote controls and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
- Thrust 60-73kg
- For 8-11m boats
- Fiberglass tunnel with Ø185 diameter
Kampanja
Advanced bow thruster from Sleipner/Side-Power
The SE50 is suitable for boats 8-11 meters long, it is very compact and efficient for a Ø140 tunnel.
The SE50 is equipped with a five-blade propeller designed for extremely quiet and efficient operation. The technology called Q-PROP™ has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be turned - all to make installation as smooth as possible, as space is often limited on boats. The special remote controls and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
- Thrust 50-62kg
- For 8-11m boats
- Fiberglass tunnel with Ø140 diameter
Kampanja
Advanced bow thruster from Sleipner/Side-Power
The SE40 is the smallest model in the series and is suitable for boats under 7 meters long, it is very compact and efficient and is the only one in the series for Ø125 tunnels.
The SE40 is equipped with a five-blade propeller designed for extremely quiet and efficient operation. The technology called Q-PROP™ has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be turned - all to make installation as smooth as possible, as space is often limited on boats. The special remote controls and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
This bow thruster should not be used as a stern thruster, choose a larger model for this purpose.
- Pulling force 40-48kg
- For 8-10.5m boats
- Fiberglass tunnel with Ø125 diameter
Kampanja
Advanced bow thruster from Sleipner/Side-Power
Suitable for boats under 6-8m long, it is very compact and efficient and is the only one in the series for Ø110 tunnels.
The SE30 is equipped with a five-blade propeller designed for extremely quiet and efficient operation. The technology called Q-PROP™ has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be turned - all to make installation as smooth as possible, as space is often limited on boats. The special remote controls and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster:
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
This bow thruster should not be used as a stern thruster, choose a larger model for this purpose.
- Pulling force 30-40kg
- Boat length: 6-8m
- Fiberglass tunnel with Ø125 diameter
Kampanja
Sleipner bow thruster
Advanced bow thruster from Sleipner/Side-Power. The SE25 is the smallest model in the series and is suitable for boats under 7 meters long, it is very compact and efficient and is the only one in the series for Ø110 tunnels.
The SE25 is equipped with a five-blade propeller designed for extremely quiet and efficient operation. The technology called Q-PROP™ has undergone thousands of tests to optimize performance, allowing for:
- Up to 75% noise reduction measured in a controlled environment
- 20-40% average noise reduction in tested installations
- Up to 5% more thrust
Sleipner/Side-Power bow thrusters are flexible to install, for example they can be installed at an angle over a fiberglass tunnel. The motor can also be turned - all to make installation as smooth as possible, as space is often limited on boats. The special remote controls and control panel, which are purchased separately, have plug-and-go connectors and only fit in one direction.
Other advantages of this bow thruster
- Smooth installation
- Operates on 12V direct current (DC)
- Galvanic isolation between motor and gearbox
- Intelligent Power Control (IPC) and overheating protection - protects the bow thruster in the event of faults and monitors operation
Complete your new bow thruster with a control panel, control cable, electrical installation and fiberglass tunnel. Remote controls are also available as accessories.
- Pulling force 25-30kg
- Boat length less than 7m
- Fiberglass tunnel Ø110
Quick bow thruster set
The propeller has a power of 3 hp and is suitable for boats 7-10 meters long. The propeller has 5 blades and effectively steers the bow of the boat sideways. The propeller oil does not need to be changed, but it lasts the entire life of the propeller thanks to special seals. The only maintenance required is checking the zinc anode, which is also easy to replace. The propeller is not held in place by a zinc anode, so there is no risk of the propeller falling off, even if the zinc anode is heavily corroded.
The patented coupling between the gearbox and the motor is flexible, which protects the system and extends its service life. This means that uneven loads, for example, do not put as much strain on the motor.
The package includes:
- Bow thruster
- Joystick with 6 meter cable
- Fuse box with fuses
Quick has a long history of manufacturing bow thrusters and is a well-established and functional structure. The company manufactures its own products in its own factories and has full control over the entire development and manufacturing process, which guarantees high quality. Quick is a common choice for many boat builders.
For installation, you will also need power cables and a fiberglass tunnel (Ø140) if the boat does not already have one.
- For boats 7-10m long
- Fiberglass tunnel (Ø140) not included in the package
- Propeller: Single 5 blades
- Power: 2.2 kW / 3 hp
- Voltage: 12V
- Thrust: 40 kg
- Weight: 12.2 kg
Kampanja
185TT bow thruster kit
Powerful 3kW (4hp) bow thruster set. Bow thruster diameter 185mm. Thrust 58 kgf, adapter, 2m cable, fuse holder and fuse. Fiberglass tube and control unit to be ordered separately.
Package contents
- Bow thruster 185TT
- Fit
- 2 meter cable
- Fuse holder
- Fuse
- Ø 185 mm bow thruster
- Power: 3Kw (4 hp)
- Thrust: 58kgf
- 12V
- Lewmar product code: 590060 3.0KW 12V
Kampanja
Complete package with Quick's bow thruster
The bow thruster is 3hp and is suitable for boats of 6-9 meters. The propeller has 5 blades and effectively drives the bow of the boat sideways. The oil in the bow thruster does not need to be changed, it lasts the entire service life of the bow thruster thanks to special seals that last a very long time. The only maintenance required is checking the zinc anode, which is also easy to replace. The zinc anode does not hold the propeller in place, so there is no risk of the propeller falling if the zinc anode corrodes heavily.
The patented connection between the gearbox and the motor is flexible, which protects the system and extends its durability. This means that uneven loads, for example, do not wear the motor as much.
The package includes:
- Bow thruster with fiberglass tunnel
- Joystick with 6 meter cable
- Fuse holder with fuse
Quick has a long history of manufacturing bow thrusters. They manufacture the propellers in their own factories and have full control over the entire development and manufacturing process, which guarantees high quality. Quick is a common choice for many boat builders.
For a complete installation, you will also need power cords and tunnel installation materials.
- Propeller: Single 5-blade
- Tunnel diameter: 125mm
- Motor power: 2.2kw/3hp
- Voltage: 12V
- Pulling force: 40Kg
- Weight: 10.9Kg
- Boat length: 6-9m/20-29ft
- Thrust 40Kg
- Complete set
- 125 mm fiberglass tunnel
Kampanja
Lewmar bow thruster 2.2kW 12V
The unique 5-blade propeller provides balanced thrust in both directions of the tunnel. All TT series propellers have a keyway mounting. Lewmar’s “cassette” seal is more reliable than conventional seals. This allows installation without an additional oil tank. The TT propeller’s anodes are easy to replace thanks to a large replacement nut. Lewmar’s controls represent a modern design, thus fitting into a wide range of control panels. The round shape allows for quick and easy installation. The TT propellers are equipped with an integrated “black box” to protect against operating errors. Motor thermal protection is standard, giving the user complete reliability during operation.
- Power: 2.2kW (3.0 hp)
- Tunnel: 140 mm
- Propeller: 5 blades
- Push kg: 42
Kampanja
1.5kW bow thruster kit
The Lewmar 110TT is a small and compact bow thruster for boats 5-8m long. The 12V bow thruster has a power of 1.5kW. With a bow thruster you get significantly more control, especially in harbours.
The set includes:
- Bow thruster, diameter 110 mm
- Joystick control unit
- 7m cable
- Fuse holder and fuse
NOTE! Fiberglass tunnel 110mm must be ordered separately.
- Bow thruster for 5-8m boats
- Power: 1.5kW
- Voltage: 12V
- Diameter: 110mm
- Weight: 8.5kg
- Manufacturer: Lewmar
- Model: 110TT
Kampanja
2kW bow thruster kit
Lewmar TT140 bow thruster for 6-10m boats. The 12V bow thruster has a power of 2kW. With a bow thruster you get significantly more control, especially in harbors.
The set includes:
- Bow thruster, diameter 140 mm
- Joystick control unit
- 7m cable
- Fuse holder and fuse
140mm tunnel to be ordered separately, available in two lengths:
- Lewmar 589101 - length 750mm
- Lewmar 589102 - length 1000mm
- Bow thruster for 6-10m boats
- Power: 2kW
- Voltage: 12V
- Diameter: 140mm
- Weight: 13kg
- Manufacturer: Lewmar
- Model: 140TT
- Complete package, contents in description
Kampanja
Lewmar 125TT bow thruster for 6-10m boats. The 12V bow thruster has a power of 2kW. With a bow thruster you get significantly more control, even in harbors.
The set includes:
- 125TT 2.0kW steering propeller 12V
- 2m cable
- 7m cable
- Joystick control unit
- Fuse holder
- 200A fuse
125mm tunnel to be ordered separately, available in two lengths:
- length 750mm
- length 1000mm
- Bow thruster for 6-10m boats
- Power: 2kW
- Voltage: 12V
- Diameter: 125mm
- Weight: 11.5kg
- Manufacturer: Lewmar
- Model: 125TT Gen2
- Complete package, contents in description
